The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   clutch questions (https://67-72chevytrucks.com/vboard/showthread.php?t=728725)

dammitmitchell 01-28-2017 12:47 AM

clutch questions
 
Hey guys,
Havent posted in a while. But now im back after a few year break from my poor old square bodies.

ive got a 91 GMC 3+3 Square body (legacy!)
gen IV 454 and a SM465 behind it.
2wd dualllllyyy
shes got a slight cam in her, headers thru exhaust and and fancy little intake pipe on her. (like that adds much).


im pleased with her so far... but i SMOKED THE CLUTCH... oops. guess she cant keep up with all these new fancy dodges.

SO.. typically i run ZOOM clutches for my SBC's that are hopped up a little and i have not once had a problem. But im not liking my under 200 dollar options for the BBC... ( i might be missing something). So i decided to be lazy and come here and ask yall for your input.

besides a stockie clutch, and going extreme with a kevlar, have yall been pleased with anything on the market?

Id love some input.

thanks!
<mitchell>

b454rat 01-28-2017 08:20 AM

Re: clutch questions
 
Run a stock clutch. Local roundy-rounder store owner had a 70s 2wd crew cab that he used to pull a pretty bin enclosed trailer to the tracks to sell parts at races. It had a 502 in it, I'm sure it wasn't stock. He used it for years, then I think gas got to be too much. I was building a big block stick truck, and wanted a beefier clutch. He told be bout said truck and used a stock clutch for years and never had any issues. I beat the snot outta the truck I built, and is still going today even after a NASTY big block in it now and mud racing.

dammitmitchell 01-31-2017 05:52 AM

Re: clutch questions
 
thank you.
i appreciate you input.

Marv D 01-31-2017 02:09 PM

Re: clutch questions
 
Not sure which trans you have (NV4500??) but I was toasting stock GM clutches with a 383 SBC in my 4x4 with a NV4500 (went through OEM + 1 GM replacement and then a NAPA replacement)
Pulling that monster of a trans is NOT fun.

Not sure which you have the 11 or 12" but one of these is cheap compared to pulling that stinking trans.

https://www.summitracing.com/parts/ram-88888/overview/

https://www.summitracing.com/parts/ram-98798/overview/

I've been pulling a 10k pound race trailer with the same clutch now for almost 10 years (80k miles miles)


All times are GMT -4. The time now is 06:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com