WTB Your not so nice cluster parts
 

Hello all,

I am getting back into the cluster restorations and need a little help.

More than anything else, I need the small tins that hold the small gauges. Nothing with too much rust or pitting.

Also, if you small gauges that do not work or have rusty faces I can use the needles from them but would buy the whole gauge.

I am hoping I can buy from one person if anyone has any inventory of these items.

I would also consider buying very nice gauges if anyone has any.

Let me know. Photos are not really needed (except for the nice gauges) but would be nice.

Thank you,
Tom

Re: WTB Your not so nice cluster parts
 

i have some gauges and dash stuff, i'll dig this weekend

Re: WTB Your not so nice cluster parts
 

Hey T-Bone! There are a bunch of pretty cheap clusters for sale on that famous auction site...
Again, glad you're back!
Randy

Re: WTB Your not so nice cluster parts
 

May have a couple of tach dashes and a speedwarning we could work something out on...

Re: WTB Your not so nice cluster parts
 

Thank you,

Let me know what you have. I appreciate the time,
Tom

Re: WTB Your not so nice cluster parts
 

Thanks Randy, glad to be back at it. I just miss doinf the cluster work when I am not doing them.

I did check on some through the famous action site. The Portland swap meet is coming and I will probably buy a bunch of stuff there really cheap and no shipping charges.

Hope all is well with you,

Take care,
Tom

Re: WTB Your not so nice cluster parts
 

Hi Eric, let me know what you are thinking. Send me a PM if you prefer. I will get you my email for photos if needed.

Thank you for reaching out.

Take care,
Tom

Re: WTB Your not so nice cluster parts
 

I have four complete clusters for you for sure and may have more if I can locate them. Your welcome to them. We can York out details later just let me know a shipping address and if you want them complete and I got 4 or 5 individual Gage's

Re: WTB Your not so nice cluster parts
 

Let me get back to you atog. I appreciate the offer but want to make sure I don't get over loaded here. I really should wait until after the Portland swap meet here in April. Those guys practically give clusters away there.

Thank you,
Tom

Re: WTB Your not so nice cluster parts
 

That was the case with these I have been passing them up and actually took a bunch to scrap yard with a blazer I stripped just to make room . If you need them just yell. But not at me cause I get my feelings hurt easily being soft spoken and all. Thanks gunner

Re: WTB Your not so nice cluster parts
 

Tom, glad to hear you are back at it. I have an 80 lb oil pressure gauge that has a rusty face that I am not going to use. Let me know if interested, we can work something out.

Thanks,
Mark

Re: WTB Your not so nice cluster parts
 

Glad you are back Tom..

Re: WTB Your not so nice cluster parts
 

[QUOTE=I did check on some through the famous action site. The Portland swap meet is coming and I will probably buy a bunch of stuff there really cheap and no shipping charges.

Hope all is well with you,

Take care,
Tom[/QUOTE]


Curses! I was hoping I would be the only one hunting for a 67 guage bezel at the swap meet.

Re: WTB Your not so nice cluster parts
 

I will certainly let you know Gunner and I won't yell at you, promise ;)

Re: WTB Your not so nice cluster parts
 

Thanks Mark, I will keep it in mind, I would only need if it if someone wants one in there cluster restoration.

Hope you are doing well there.

Take care
Tom

Re: WTB Your not so nice cluster parts
 

Thank you, glad to be back at it and take care of you guys needing cluster work.

Take care,
Tom

Re: WTB Your not so nice cluster parts
 

Should have a little time today to do some digging...

Re: WTB Your not so nice cluster parts
 

;)

Re: WTB Your not so nice cluster parts
 

Tom,
Glad your back! I might have some inner and outer tins, along with the small gauge backing tins. Did you need wholes clusters that aren't rusty. Lmk buddy.

Re: WTB Your not so nice cluster parts
 

These are some I picked up and haven't had a chance to do anything with. I consider these as builders and I know nothing about them. Will send a PM later...

Re: WTB Your not so nice cluster parts
 

Hi Dave,

Good to be back. Hope you are doing well there. Yes on the small gauge tins but don't really need the inner and outer tins. If you have any decent (non rusty) clusters, I may be interested. I have had a pretty good response here.

Also the Portland swap is coming and I can score some good parts there as well.

Let me know what you have and I will get back to you.

Thanks for reaching out,
Tom

Re: WTB Your not so nice cluster parts
 

Thanks Eric,

Look forward to your PM.

Take care,
Tom

Re: WTB Your not so nice cluster parts
 

pics,bottom tin has a hole cut for tach. the other tin had a speed warning add on, so they drilled holes. also have a 60lb oil gauge with the nut, maybe a dash lens someplace. pay shipping and its all yours.

Re: WTB Your not so nice cluster parts
 

Well, I don't need the bezels or the tins but could use the small gauges and hardware. Maybe ship in a med flat rate box? If you send me a PM, I can get you my address and you can get me your paypal or how ever you want payment.

Thank you,
Tom

Re: WTB Your not so nice cluster parts
 

hardware meaning in last pic (bulbs pile)