The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   61 C10 Steering Column (https://67-72chevytrucks.com/vboard/showthread.php?t=732319)

61ShortboxDave 03-09-2017 02:17 PM

61 C10 Steering Column
 
Looking for steering column suggestions for my 61 Short Box Project. I plan to go auto on the column. A tilt column would be nice. Just wondering what others have used or preferred?

Thanks for your time and info, Dave

AcampoDave 03-09-2017 08:04 PM

Re: 61 C10 Steering Column
 
In my experience dinkin'around with junk yard stuff has only led to frustration. These days all the good stuff from the old days seems to be gone. I urge you to contact a reputable vendor of aftermarket columns and discuss your needs with them. It won't be cheap, but it will be safe. The install will be done right and you wont be trying to hack your e-brake mechanism only to wind up with something that has poor geometry. If your gonna do it, jump in with both feet and spend the bucks to go power steering.

southern parts 03-10-2017 08:47 PM

Re: 61 C10 Steering Column
 
find an automatic (powerglide) column from a 59-60 impala. change out a couple pieces from the manual column in your truck now and it`s just like a 60-62 truck automatic column.

65chevysub 03-11-2017 03:52 PM

Re: 61 C10 Steering Column
 
I'm running a 72 tilt column in my 65. The best part is that I was able to use my deluxe steering wheel on it. I'm trying to figure out how to modify an original shifter to use the base that goes into the column so it looks more original.

62 Barnfind 03-11-2017 04:02 PM

Re: 61 C10 Steering Column
 
I ordered a Idid it column for my 62. It has been on back order since December and I should get it next week. I was getting tired of the worn parts in my original column and that turn signal switch set up. I'll let you know how it comes out if you want?

southern parts 03-11-2017 04:05 PM

Re: 61 C10 Steering Column
 
I think you can buy the 66 type knob. Put it on the 72 shift lever.

Clif Dzzzz 03-22-2017 10:39 PM

Re: 61 C10 Steering Column
 
65chevysub....you stated the use of the original steering wheel.....on a 72 column.....could ya get the horn to function ?.


All times are GMT -4. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com