The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   New exhaust! (https://67-72chevytrucks.com/vboard/showthread.php?t=736401)

70c10guy 04-25-2017 10:23 PM
New exhaust!
 
Need some advice guys, I'm looking to trash the stock y pipe and weld up new pipes. Does anyone know if a 45 degree bend with a flange connecting it to the manifold will work off the manifold and put me parallel to the frame? I want to go from the manifold to behind the tail shaft, put the flowmaster merge pipe to 3".

mountie 04-26-2017 05:07 PM
Re: New exhaust!
 
Quote:
Originally Posted by 70c10guy (Post 7925897)
Need some advice guys, I'm looking to trash the stock y pipe and weld up new pipes. Does anyone know if a 45 degree bend with a flange connecting it to the manifold will work off the manifold and put me parallel to the frame? I want to go from the manifold to behind the tail shaft, put the flowmaster merge pipe to 3".
Uh, what's your year-model-engine?

70c10guy 04-26-2017 06:00 PM
Re: New exhaust!
 
Crap, completely forgot to add that.. my truck is 93 c1500 with a 350/4l60e. Wanting to go from manifold, 45 degrees, straight, past the trans, driver side going under the tail shaft and merging with a straight one from the passenger side.


All times are GMT -4. The time now is 09:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com