The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - driveshaft lenght on a v8 ... ? (https://67-72chevytrucks.com/vboard/showthread.php?t=737040)

Lokin4AReason

05-03-2017 11:24 AM

driveshaft lenght on a v8 ... ?

hello all,

would anyone knowing a driveshaft length with using a 700r4 on a v8 on a 66 ( original setup v8 w/ power glide )

PGSigns

05-03-2017 11:59 AM

Re: driveshaft lenght on a v8 ... ?

Depends on what what length tail shaft is on the trans. Short bed or long? I prefer to take actual measurements so I know it will fit when I get one made.
Jimmy

Lokin4AReason

05-03-2017 05:29 PM

Re: driveshaft lenght on a v8 ... ?

long bed also could the current transmission mount be modified to accept a 700r4 ( with replacing the rubber mount bushing ) or an aftermarket one is needed ... ?

padresag

05-03-2017 06:15 PM

Re: driveshaft lenght on a v8 ... ?

you may have to move the crossmember back a bit to match up for the mount. here are the dimensions
http://chevellestuff.net/tech/automa...dimensions.htm
ron

All times are GMT -4. The time now is 06:11 AM.