The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Joined the square body club (https://67-72chevytrucks.com/vboard/showthread.php?t=737612)

rsmarr1982

05-10-2017 10:10 PM

Joined the square body club

4 Attachment(s)

I joined the square body club this week with the purchase of this 79 k10 . It's got a 350/th350 with full time 4x4. Not sure what gear ratio yet but I think it's prolly 3.73 or 4.10. I got it from Montana it has a little rust but still 10 times cleaner than anything in northeast Ohio unless you pay $8k. I wanna swap a 700r4 in it any adapters needed? Is it an east swap?

bilfman

05-10-2017 11:18 PM

Re: Joined the square body club

Looks like a great start!

TKCR	05-11-2017 06:21 AM

Re: Joined the square body club

Welcome!! Happy to see fellow Ohioans on here. Nice find. And your right, it hard to find a decent truck around here, but you will have to pay dearly for it.

cadillac_al

05-11-2017 07:09 AM

Re: Joined the square body club

Nice truck. Same color as mine. That's what mine is supposed to look like before the rust took over. I would just burn the gas instead of changing transmissions.

Tash4

05-11-2017 09:51 AM

Re: Joined the square body club

Nice truck. If you have a 205 t-case there is an adaptor out there, i put one in a 82 with the right coupler . had to grind a little length off the 700r4 output shaft. It really made the truck driveable on the highway.

All times are GMT -4. The time now is 12:48 AM.