The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Partaily restored 69-72 tach cluster (https://67-72chevytrucks.com/vboard/showthread.php?t=739143)

TBONE1964 06-01-2017 02:08 AM

Partaily restored 69-72 tach cluster
 
4 Attachment(s)
I have here a partially restored original tach cluster for a 69-72 Chevy truck. New aftermarket bezel. The tach is non working. It needs a circuit board. The speedometer has been calibrated, odometer to zero but can be set to your choice, fuel gauges, temp, amp, and oil pressure gauge have all been tested and OK. I need $300.00 plus shipping. For an additional $175.00, I will replace the tach with an aftermarket and circuit board, as well as new bulbs. Look closely at photos and ask questions. This is not a perfect restoration.

Thank you for looking. By the way, if I sell this cluster, I will put the money up for a High Octane membership.

Take care,
Tom

TBONE1964 06-05-2017 10:25 AM

Re: Partaily restored 69-72 tach cluster
 
TTT,

Make a reasonable offer on this if interested.

Thank you,
Tom

TBONE1964 06-09-2017 11:53 PM

Re: Partaily restored 69-72 tach cluster
 
weekend bump.

rusty knuckles 5 06-11-2017 10:54 AM

Re: Partaily restored 69-72 tach cluster
 
HI! what is wrong with the tach

TBONE1964 06-11-2017 01:42 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by rusty knuckles 5 (Post 7964566)
HI! what is wrong with the tach

Good question. I got this tach and it was assumed non working so that is how I am selling it. I suppose it would be a good idea to test it and see why it does not work.

Stay tuned, I will check it today and report my findings.

Thank you for the interest,
Tom

TBONE1964 06-11-2017 05:03 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by rusty knuckles 5 (Post 7964566)
HI! what is wrong with the tach

I guess I should have tested this tach earlier. The tach does work but needle sticks at 2600 RPM then falls back. Works great up to 2600. I have seen this before and sometime just using the tach will bring them back to life but it is not guaranteed.

rusty knuckles 5 06-11-2017 08:00 PM

Re: Partaily restored 69-72 tach cluster
 
thank you

TBONE1964 07-09-2017 05:37 PM

Re: Partaily restored 69-72 tach cluster
 
TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.

LockDoc 07-09-2017 06:37 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by TBONE1964 (Post 7987067)
TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.

I will take it Tom.

LockDoc

russgoodman 07-09-2017 06:43 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by TBONE1964 (Post 7987067)
TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.


Tom, I will take it. Can you still replace the tach and circuit board/bulbs for the extra $175? Might be interested in the voltage gauge upgrade too since I will be using AAW wiring kit.

Thanks
Russ


Nevermind, Leon beat me to it. :metal:

TBONE1964 07-09-2017 10:35 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by LockDoc (Post 7987106)
I will take it Tom.

LockDoc

Thank you Leon. I will send you PM with details.

Take care,
Tom

TBONE1964 07-09-2017 10:37 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by russgoodman (Post 7987111)
Tom, I will take it. Can you still replace the tach and circuit board/bulbs for the extra $175? Might be interested in the voltage gauge upgrade too since I will be using AAW wiring kit.

Thanks
Russ


Nevermind, Leon beat me to it. :metal:

Thanks anyway. If Leon backs out, I will contact you.

Take care,
Tom

LockDoc 07-09-2017 11:22 PM

Re: Partaily restored 69-72 tach cluster
 
Quote:

Originally Posted by TBONE1964 (Post 7987305)
Thank you Leon. I will send you PM with details.

Take care,
Tom

PayPal sent + fees.

Thanks,
LockDoc


All times are GMT -4. The time now is 07:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com