The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - need help with 292 p/s pump bracket (https://67-72chevytrucks.com/vboard/showthread.php?t=740957)

teamadams

06-25-2017 01:57 AM

need help with 292 p/s pump bracket

1 Attachment(s)

does any one know where I can find a lower adjustment bracket for power steering pump on a 292 ? Attachment 1664602 looks like this one

pimpston65

06-25-2017 07:37 AM

Re: need help with 292 p/s pump bracket

Quote:

Originally Posted by teamadams (Post 7975905)

does any one know where I can find a lower adjustment bracket for power steering pump on a 292 ? Attachment 1664602 looks like this one

i just eye balled a piece a member was selling. is the engine in the picture the one you need it for? i just wanted a wider shot showing that pulley...

teamadams

06-26-2017 09:12 AM

Quote:

Originally Posted by teamadams (Post 7975905)

does any one know where I can find a lower adjustment bracket for power steering pump on a 292 ? Attachment 1664602 looks like this one

Posted via Mobile Device

aotte1

06-27-2017 01:03 AM

Re: need help with 292 p/s pump bracket

They sell replacement ones for SBCs of this time period that are similar.
Got mine from Summit couple of years ago.

Your photo, is it of a 64 to 66' 292? It look a little different, hard to tell from photo.
A search of "292 PS", will show some photos of original 292s with PS set-up posted by "60-66".

Hope this helps,
Les

cg285

06-27-2017 08:07 AM

Re: need help with 292 p/s pump bracket

make one. pretty simple

teamadams

06-27-2017 08:46 AM

2 Attachment(s)

Quote:

Originally Posted by cg285 (Post 7977775)

make one. pretty simple

Thanks for all the help I just made one now I need to find a belt it came with dealer installed a/c knee knocker and now my belt needs to go around a/c crank and p/s
Posted via Mobile Device

teamadams

06-27-2017 08:50 AM

2 Attachment(s)

Quote:

Originally Posted by teamadams (Post 7977800)

Thanks for all the help I just made one now I need to find a belt it came with dealer installed a/c knee knocker and now my belt needs to go around a/c crank and p/s
Posted via Mobile Device

Posted via Mobile Device

teamadams

06-27-2017 01:48 PM

2 Attachment(s)

Quote:

Originally Posted by teamadams (Post 7977805)

Posted via Mobile Device

Posted via Mobile Device. I think I need 3 groove pully's???t

All times are GMT -4. The time now is 08:24 AM.