![]() |
panhard bar diff mount
I bought an adjustable panhard bar which is 1.25". I have an aftermarket finned diff cover and the bar hit the fins. I ground off the fin area that was hitting but the bar still hits the cover. I tried adding a 1/8" washer behind the bar but it still hit. Adding any more washers and the nut doesn't have enough room for full thread seat. Does anyone make a longer stud for the diff mount?
|
Re: panhard bar diff mount
Put the stock cover back on.
OR Swap to the bar and mount that mounts to the passenger trailing arm U-bolt. |
Re: panhard bar diff mount
Quote:
|
Re: panhard bar diff mount
Sounds like it is a different bar. Made for the pass side.
|
Re: panhard bar diff mount
|
Re: panhard bar diff mount
Quote:
|
Re: panhard bar diff mount
Does your new bar attach to the original location on the differential?
|
Re: panhard bar diff mount
Sounds to me like you need the long curved bar!
|
Re: panhard bar diff mount
1 Attachment(s)
Yes the long curved bar, I ordered mine from cpp. Here is my pic of it installed. :chevy:
|
Re: panhard bar diff mount
Quote:
|
Re: panhard bar diff mount
Quote:
|
Re: panhard bar diff mount
Quote:
|
Re: panhard bar diff mount
I got the CPP curved bar mounted today, worked out perfect. Thanks for all the advice. Anyone want an nice double adjustable panhard bar that mounts in the stock location with a stock diff cover, will sell it for $60 including shipping.
|
Re: panhard bar diff mount
Does the bar you have to sell have the brackets? Made by? Part # ? Very interested. tks Pls call me. 540-520-3418-cell Headed to Atl. now. Maybe we could meet and save u the shipping. Phone # good to call all night. TKS
|
Re: panhard bar diff mount
Quote:
|
All times are GMT -4. The time now is 02:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com