Ls3 swap parts list
 

I just purchased a used LS3 out of Camaro. I'll be purchasing parts in the coming weeks to drop into my 68. I currently have a 5.3 in it now but I'll be selling it soon.

LS3
4L80E
Standalone harness
PCM (unsure which one will work with my combo)
Camaro pedal
Trans cooler w/lines
Oil cooler
Boyd's fuel cell
Fuel lines/filters
Speed engineer LT's
Black widow mufflers
Dirty dingo swap mounts

Upgrades, not necessary for swap

BTR stage 4 cam
Springs/pushrods/retainers
Fast 102 intake w/rails
CNC ported heads

Anything else missing for needed swap?

Re: Ls3 swap parts list
 

I would switch to the 2005+ corvette pedal. It looks almost identical to the 71/72 pedal. Take a look at my 68 S/C build.

Re: Ls3 swap parts list
 

Yes, lots. The little things add up quick.

Engine mounts/adapters
Driveshaft
Accessory mounts (if needed)
Electric fan/shroud
Gauges or sending unit adapters
Shifter or adapter
Possible battery relocation
Additional fuse box/wiring

Lots of other things I'm probably missing, that's just off the top of my head. Plan, plan, and plan some more, then leave extra time and room in your budget for the inevitable unexpected.

Re: Ls3 swap parts list
 

You'll need an oil pan too, don't think the Camaro LS3 one will work in a truck.

Re: Ls3 swap parts list
 

After looking up the corvette pedal, it does look like a better match and appears it has more range then the Camaro. It doesn't have much of a range of motion. They are faulty cheap too. I quickly cruised through that build thread. You got some awesome projects :metal:!

Gauges will be down the road, I'll be going with A Dakota set. I will be upgrading my radiator with the entropy one with dual electric fans. As far as drive shaft more then likely I'll just either shorten the one piece one I have now or might even order a custom one from the drive shaft shop, depending on budget.

I most certainly forgot about that! I'll add it to the list. Thanks everyone.

As far as the alternator goes, it's currently located low on the driver side, does anyone know if it has to be relocated up high?