Do you know this frame
 

Im in the middle of tearing down a 87 S10 for a frame swap for my 52 AD and yes if i had the original i would use it but i dont. Its pretty bad shape but the frame the truck is on is much better. It has a 116" wheelbase with a 62" 12 bolt rearend with a V8. Think I'm just going to use the frame its on. Anyone know what year the frame is?

Re: Do you know this frame
 

just a guess without some more pics,, but I'm guessing some kind of car frame based on the frame being pulled in behind the axle..what does the front half of the frame look like?

Re: Do you know this frame
 

Sory this is all i have

Re: Do you know this frame
 

The front end has been bolted into frame also.

Re: Do you know this frame
 

It looks like a 63-66 or 67-72

Re: Do you know this frame
 

If the rear springs are original then I'd say 71 or 72 GMC
Its definitely a 67-72 style frame

Re: Do you know this frame
 

here's one I found..believe this pic is a 72...

Re: Do you know this frame
 

It looks like a 71 or 72 but mine doesnt have the cross bar at 90.2

Re: Do you know this frame
 

Leaf spring trucks don't have that cross member.

Re: Do you know this frame
 

Did the 1/2 ton come with spings or does this look like a 3/4 ton?

Re: Do you know this frame
 

12 bolt was half ton.

Re: Do you know this frame
 

gmc's were leaf spring rears if I recall.

Re: Do you know this frame
 

Yep most GMC 1/2 and 3/4 for those years were rear leaf while most if not all. Chevys were rear coil.

I'd say 71/72 with the front disk brakes. A bit wide in the front unless you want to run a big truck nose or have the tires outside the fenders a tad.