The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - KS Needed (https://67-72chevytrucks.com/vboard/showthread.php?t=743278)

dtkarst

07-25-2017 10:36 PM

Needed

Needing a 2 barrel carb air cleaner spacer. Let me know what you've got

dtkarst

07-26-2017 03:28 PM

Re: Needed

Top

Jens Jimmy

07-26-2017 08:05 PM

Re: Needed

DT, I believe I have one. I will check later, when I get home.

RogerKoop

07-27-2017 07:20 PM

Re: Needed

Quote:

Originally Posted by Jens Jimmy (Post 8001022)

DT, I believe I have one. I will check later, when I get home.

Does you need one with a hose on it. I have 2.

bill3rail

07-27-2017 08:46 PM

Re: Needed

Sounds harder to find than a monojet riser with hose...Trust me, I keep looking and looking!

Bill

Jens Jimmy

07-27-2017 09:42 PM

Re: Needed

DT, I THOUGHT I had one, but I guess not. sorry

dtkarst

07-27-2017 09:43 PM

Re: Needed

Yes I have a hose coming off the valve cpver

54Caddy

07-27-2017 10:08 PM

Re: Needed

I might be able to get one. It'll be off a 71 with a 307 that had a 2 barrel. Hose did connect to it from valve cover need the hose also?

dtkarst

07-28-2017 08:06 PM

Re: Needed

I have the hose. Let me know, thanks

RogerKoop

07-28-2017 09:07 PM

Re: Needed

I have an NOS one. GM part# 3976218. Fits 1969 6 cyl. Will that work?

1auctiondad

07-30-2017 08:52 PM

Re: Needed

I have a nice used one of a 71 v8 2 barrel...$25 shipped

dtkarst

07-30-2017 09:28 PM

Re: Needed

Works for me. Pm sent

Quote:

Originally Posted by 1auctiondad (Post 8003865)

I have a nice used one of a 71 v8 2 barrel...$25 shipped

dtkarst

08-06-2017 12:14 PM

Re: Needed

Quote:

Originally Posted by RogerKoop (Post 8002601)

I have an NOS one. GM part# 3976218. Fits 1969 6 cyl. Will that work?

I'm not sure if a 6 cylinder would work. I don't think there would be much difference

Top still looking for one

bill3rail

08-06-2017 09:53 PM

Re: Needed

Quote:

Originally Posted by dtkarst (Post 8009928)

I'm not sure if a 6 cylinder would work. I don't think there would be much difference

Top still looking for one

Look at the carburetor gasket diameter and you will know. I believe the Monojet is 2-5/8" ID gasket. Rock Auto is good for referencing gasket sizes.

Bill

54Caddy

08-08-2017 06:54 PM

Re: Needed

1 Attachment(s)

Is this what you need?

All times are GMT -4. The time now is 03:43 AM.