69-70 c10 Fenders
 

Will the 69-70 fenders work for a 67-68 front end? I searched around and some people say yes, others say no.

Re: 69-70 c10 Fenders
 

The '67 didn't have marker lights so no cut out in the fender for them.
Otherwise they are the same.
68-72. Same fenders came with side markers.
67-68 had body molding that went over the wheel wells so may be holes there from molding clips.
79-72 no molding around wheel well
That's my understanding of it anyway.
Think it's right.
Mark

Re: 69-70 c10 Fenders
 

1969 to 1972 fenders will go onto your 1967/1968 front end but only if you change the radiator core support and hood over to a 1969 to 1972. I'd assume the grill would have to change also.

Now I believe the GMC never changed at all throughout the model run.

Inner fenders are the same.

I'm pretty sure on this but could be wrong. (99% sure)

Re: 69-70 c10 Fenders
 

It DEPENDS

GMC used the same front fenders from 67-72 (with 67's having no side markers).

The GMC and Chevy fenders are the same in 1967/68 (so you can use 69-72 GMC fenders if you want a 67/68 Chevy grill).

69-72 Chevrolet Fenders are completely different at the nose and will not work for a 67/68 Chevy or 67-72 GMC

Pic 1 is 67/68 Chevy and 67-72 GMC (again, only difference is no side markers on 67 fenders).

Pic 2 is 69-72 Chevy ONLY. These fenders have a recess that the 69-72 chevy grill fits OVER. These will not properly work with a 67/68 Chevy grill or 67-72 GMC grill.

Re: 69-70 c10 Fenders
 

ohk thanks that answers my question.