Clutch bell crank bracket
 

I have a 1979 Chevy k20 that had a turbo 350 transmission. I'm changing to a manual sm465. I'm trying to locate a new clutch bell crank bracket for the frame. I checked lmc and they do not sell that part.

Re: Clutch bell crank bracket
 

I made my bracket when I did my swap I bent a piece of 1/4in plate about 6in long by 5in I bent it long ways 3in leaving 2in to mount the ball stud then I clamped it to the frame and marked the holes in frame and also marked placement of ball stud. After the holes were drilled I mounted it and the bellcrank then marked where I needed to trim for bellcrank movement.