Factory buckets
 

Factory buckets excellent condition for renovation
$450
One seat stripped and blasted. Should have most of the cross rods (?) but are available and often replaced when upholstering.
Other seat intact with original worn out cover.
All metal is excellent condition virtually no rust to begin with and minimal surface rust from prolonged storage - easily cleaned up.
Driver side brackets blasted and in excellent working condition.
NOTE: Seats were parchment, driver side was sprayed with black.
After stripping and blasting first seat, upholsterer advised me against doing so with other seat - could be saved?
No passenger bracket - reproduction readily available.
Priority to Local/regional pickup.
Can deliver to Carlisle.
Consoles available - no cracks. Seat belt and cup holder style.

Re: Factory buckets
 

Also interested in brackets only and can pick up at Carlisle.

Re: Factory buckets
 

Sorry guys.
No to brackets alone.
Selling them all together.

Re: Factory buckets
 

Sent you a PM on a console with cup holders.

Re: Factory buckets
 

Interested in cup holder console....Pics?

Re: Factory buckets
 

Thanks for the interest.
I'll try to get photos up today.

Re: Factory buckets
 

Also may be interested in cup holder console. Really only need the top half if you have one that has a cracked or broken base. I am going to make a bench seat console so the bottom half will be scrapped anyway.

Re: Factory buckets
 

That sounds interesting! Please post pics when you are done!

Bump for the OP.

Re: Factory buckets
 

Steve, here is a link to one another member did. I am going to copy this idea:
http://67-72chevytrucks.com/vboard/s...6&goto=newpost

Re: Factory buckets
 

I know you said no to selling just the brackets.But... I really need to get this project done.How about I offer u $350.00 for just the brackets.I know you could sell those buckets for a $100.00,thats a great deal for someone.Maybe someone reading this now,or you could just re-post the buckets for a $100.00.I have to give it a shot.

Re: Factory buckets
 

Buckets: Regarding the rich offer on the brackets - If no takers for the set in short order, I will consider it.

Consoles: Bad news - they are not where they were supposed to be. Both were tan. Cup holder was the newer tan color, the 69-72 seat belt model was saddle tan. If I locate them I will post them up here.

Dustmaker - saw your PM - neither of these are parchment (as you can tell) I do have (confirmed) original parchment base - good condition and a lone parchment top/door but it has two extra holes drilled in it. I doubt you're interested but they are original parchment. I think most everyone repaints these unless they get lucky.

Stovebolt - I don't have a top base/half for you, although I do have a top/door but it has a couple extra holes in it. BTW I like your idea/use of just the top half for a bench console!

Re: Factory buckets
 

Thanks, appreciate that
Posted via Mobile Device

Re: Factory buckets
 

I will take them at your asking price if you will ship them.
They should box up pretty easy and there not that big or heavy. 2 extra large boxes from Home Depot should do the packaging.
Send me box dimensions and weight and I will email you a prepaid label for ups shipping, you just box up and drop of at the ups store.

Re: Factory buckets
 

OK Randy.
I'll get it done tomorrow and report back.
Thanks for your interest and clean approach.

Re: Factory buckets
 

Is this tan cup holder console crack free? If so, how much shipped to 61554?

Thanks!
Jimmy

Re: Factory buckets
 

halfstep, I do have an extra set of bucket brackets(I think? :) ) I am getting old and forgetful though.

Re: Factory buckets
 

Great, thank you!

Re: Factory buckets
 

Here is packaging pics

Re: Factory buckets
 

In the box... fits ok and your seats don't have mounts on them so will fit in better, slip another box over the top and tape it up good.
PM me your address and I will get a shipping tag ready. Just need dimensions as I will use the weight of the box in the picture.

Re: Factory buckets
 

Randy -
Thanks for the specifics and visuals.
Already got a U-Haul small wardrobe box - Perfect fit. You are packed and ready to go.
Found a bunch of the cross springs and packed them in as well.
Here are the details: 24x20x35, weight 60+/- lbs.
I'll pm email/address.

Re: Factory buckets
 

PM replied to, packing job looks great! Just verify your PayPal email address and I will pay and send shipping label.

Re: Factory buckets
 

I forgot to ask what the price was on the console in the pictures...

Re: Factory buckets
 

Not available at present - gone from where I last stored them....
I will post formally when I locate them.
Top is a 69-72 seat belt version, bottom is 73+ cup holder.
I did not intend to get folks going but when I referenced them in the bucket seats ad inquiring minds wanted to know so I posted the photo's before I put my hands on them...

Re: Factory buckets
 

SOLD
Items en route via UPS.