The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - rebuilt wind wing install? (https://67-72chevytrucks.com/vboard/showthread.php?t=744102)

Ricks1971

08-07-2017 10:24 AM

rebuilt wind wing install?

I am finally putting the doors back together and I have install the rebuilt wind wing. does anyone have a pic of the proper way the rubber at the bottom goes on at the door? thanks Rick

LockDoc

08-07-2017 11:38 AM

Re: rebuilt wind wing install?

Quote:

Originally Posted by Ricks1971 (Post 8010623)

I am finally putting the doors back together and I have install the rebuilt wind wing. does anyone have a pic of the proper way the rubber at the bottom goes on at the door? thanks Rick

No picture but the rubber goes on the inside of the door. Before you put them together check the metal strap that ties the inner and outer door halves together and make sure it isn't cracked or broken. If it is broken the inner and outer door will spread apart and there will be a gap between the vent rubber gasket and outer door skin.

LockDoc

Ricks1971

08-08-2017 05:45 PM

Re: rebuilt wind wing install?

Thanks Leon, I should of put the window wipes in last but I didn't. live and learn

LockDoc

08-09-2017 12:31 AM

Re: rebuilt wind wing install?

Quote:

Originally Posted by Ricks1971 (Post 8011690)

Thanks Leon, I should of put the window wipes in last but I didn't. live and learn

No problem, I have done that before too....

LockDoc

All times are GMT -4. The time now is 08:48 PM.