The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   89 Suburban 3/4 Heavy Towing Pkg. (https://67-72chevytrucks.com/vboard/showthread.php?t=744190)

brown7373 08-08-2017 12:30 PM

89 Suburban 3/4 Heavy Towing Pkg.
 
2 Attachment(s)
I have a dried out and brittle and broken vacuum line. It is about 1/64 outside diameter line and goes through the firewall, to the A/C / heater assembly I think. It is a tiny line.

Any ideas on how to splice a new piece in? I have never seen a connector that small. It looks like the small line was glued into the larger rubber connector behind the air cleaner, and that is probably the way it connects to the ventilation system through the firewall under the reel out light on the left.

kwmech 08-09-2017 01:15 AM

Re: 89 Suburban 3/4 Heavy Towing Pkg.
 
May have to go under the dash and splice a new line out

Edahall 08-09-2017 06:39 AM

Re: 89 Suburban 3/4 Heavy Towing Pkg.
 
Quote:

Originally Posted by kwmech (Post 8012004)
May have to go under the dash and splice a new line out

Agree with the above or just replace the line. While towing a very heavy load up a steep pass, the exhaust manifold on my 6BT Cummins got hot enough to melt these little lines off. I patched it so the A/C would work for the rest of the trip but later replaced the line that runs under the dash.


All times are GMT -4. The time now is 09:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com