The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Will mini starter fit? (https://67-72chevytrucks.com/vboard/showthread.php?t=744768)

bosephus

08-17-2017 11:45 AM

Will mini starter fit?

I have a one piece rear main block mated to a 61 manual bellhousing. The original design starter bolts to the bell while the mini would bolt to the engine block. Does anyone know if the mini would work? IIRC i have the 153 tooth flywheel. Thanks,Bo

LVPhotos

08-17-2017 02:26 PM

Re: Will mini starter fit?

1 Attachment(s)

It should. Make sure the holes are in the block. Mine are offset on the 400 block and no hole for straight set. Old Billet aluminum block with Izzuzu diesel starter before minis were available.

bosephus

08-17-2017 04:33 PM

Re: Will mini starter fit?

Quote:

Originally Posted by LVPhotos (Post 8018655)

It should. Make sure the holes are in the block. Mine are offset on the 400 block and no hole for straight set. Old Billet aluminum block with Izzuzu diesel starter before minis were available.

Hotrodding at its best right there:metal:, Thanks

txinliner

08-27-2017 12:25 PM

Re: Will mini starter fit?

I run one on my hopped up 6

rvrfoot

08-27-2017 12:54 PM

Re: Will mini starter fit?

I have a 283 from a 58 to 62 and it will not.

All times are GMT -4. The time now is 01:45 AM.