Pics of 4x4 High Hump Cab Floors
 

Looking for pics of the cab floor for a 4x4 high hump, reg cab or crew cab. Pics from top and bottom.

I have a '76 low hump 2wd crew cab that I want to convert to high hump 4x4. Getting the cab piece to finish off the rear of the 4x4 high hump is probably going to be very difficult, so I'm hoping to amass enough pictures to fabricate my own to mimic stock.

Any help is appreciated.

Thanks!

Re: Pics of 4x4 High Hump Cab Floors
 

The picture I gave you wasn't good enough? I wouldn't fabricate one. There are a lot of 4x4parts cabs out there.just make sure you don't end up with one from a Blazer. Lots of sellers fail to mention that

Re: Pics of 4x4 High Hump Cab Floors
 

This^^ Find one that's being parted out. Theres a lot out there. Craigslist or junkyards, or facebook market place is becoming a very popular source of parts too

Re: Pics of 4x4 High Hump Cab Floors
 

Good used parts are very hard to come by where I live. I'd love to splice the correct part into my cab, but I'm not going to buy a $1000-1500(or more) complete truck to make it happen.

The pictures you sent were great for learning but if I'm going to copy the factory, I was hoping for larger pictures with more detail. Just looking to see what people have out there.

Re: Pics of 4x4 High Hump Cab Floors
 

1774btcrew does sell good used parts and nos stuff,If you ask him nicely im sure he could find you a nice used one to buy.

Re: Pics of 4x4 High Hump Cab Floors
 

I agree, I'd love to find good used metal. I'm planning in the event I can't within a reasonable amount of time.

I found this thread. very helpful for pictures.
http://67-72chevytrucks.com/vboard/s...d.php?t=541892