The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Side glass channel (https://67-72chevytrucks.com/vboard/showthread.php?t=745584)

RodnRudy

08-28-2017 03:07 PM

Side glass channel

2 Attachment(s)

A question about the glass run fuzzy channel that goes in the vent wing u channel. Does this piece of channel rivet to the u channel? Or does it just push in? Mine looks like it is riveted up where the vent wing rubber is fastened to the channel.

BIG ORANGE

08-28-2017 03:19 PM

Re: Side glass channel

Just clean out that track real good and put a bead of 3M weather-stripping glue
and push new channel into track, you should be good to go....

GASoline71

08-28-2017 05:04 PM

Re: Side glass channel

Quote:

Originally Posted by BIG ORANGE (Post 8027015)

Just clean out that track real good and put a bead of 3M weather-stripping glue
and push new channel into track, you should be good to go....

That's what I did. Used 3M Windo-weld.

Gary

All times are GMT -4. The time now is 11:00 AM.