The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MD Vinyl Door Panels (https://67-72chevytrucks.com/vboard/showthread.php?t=746401)

special-K 09-11-2017 06:40 AM

Vinyl Door Panels
 
4 Attachment(s)
I have a so-so pair of bright red (Now $20), a single very nice driver side same panel ($25) SOLD!, and a hard to find single very very nice black '69 w/GMC embossed passenger side ($30). They could be cleaned up better and edges glued. The so-so panels are usable. Hoping they'll help someone out for cheap.

If interested, give zip code for shipping quote. If purchasing, I'd like a postal money order for payment.

The pair:

special-K 09-11-2017 06:45 AM

Re: Vinyl Door Panels
 
5 Attachment(s)
I had the red panels for my '67 project to run till it got closer to being refined. The black one I just liked and it's rare. This red panel is sold.

special-K 09-14-2017 08:36 PM

Re: Vinyl Door Panels
 
These are for manual windows and locks

atog 09-14-2017 08:40 PM

Re: Vinyl Door Panels
 
Do you happen to have any fawn colored ones with the rare green trim?

special-K 09-14-2017 09:56 PM

Re: Vinyl Door Panels
 
No, but I have green with fawn trim for an extended cab 3rd door

atog 09-15-2017 01:09 AM

Re: Vinyl Door Panels
 
Well damn the bad luck

SIXTY9 09-15-2017 04:39 AM

Re: Vinyl Door Panels
 
Looking at Red ones, and do you have any of the top stips for them? they will be painted. Shipping to 29418

Thanks

special-K 09-15-2017 07:34 AM

Re: Vinyl Door Panels
 
I believe I do have the strips. They are chrome for the vinyl covered panels, but you want to paint, right? Let me check for those

SIXTY9 09-15-2017 07:48 AM

Re: Vinyl Door Panels
 
OK Thanks

special-K 09-16-2017 04:04 PM

Re: Vinyl Door Panels
 
I do have one spare pair of the retainers. The chrome is only so-so, but if you want to paint they'll be perfect. The chrome always looks worse off the truck.

SIXTY9 09-17-2017 08:52 AM

Re: Vinyl Door Panels
 
Sorry for the delay, I appreciate you looking but I think I will use my 72 panels.
I will be going Black on the interior.

special-K 09-17-2017 09:13 AM

Re: Vinyl Door Panels
 
No problem. I bought a really nicely done black set of buddy buckets, so I've switched from red to black, too. Too bad you're not doing red. I let the red buddy buckets go but still have a primo set of red belts, visors w/clips, and dash pad I may decide to sell at some point. These panels were in a building I needed to clear out to do major work on, so trying to sell. The rest is in good keeping.

special-K 09-18-2017 07:45 AM

Re: Vinyl Door Panels
 
With this talk about changing colors it has occurred to me these can always be dyed. The dye these days is awesome. I took odds & ends Cheyenne interior pieces and dyed them black for the '71 Custom/30 wrecker I had and it all held up great!

Also,the pair would make great cores for new covers at this price. Reproductions are Crapstic, I mean plastic crap.

Another option would pull vinyl, strip glue, and paint for base trim panels. These are good steel panels.

I just don't need this stuff

prairewolf 09-18-2017 11:49 AM

Re: Vinyl Door Panels
 
I will take/buy the red ones. 57106 for shipping quote and I can/will send a postal money order in 2 weeks when next paycheck comes. Thanks

special-K 09-19-2017 07:44 AM

Re: Vinyl Door Panels
 
EDIT: This deal didn't go through. Still available 11/6

Also, just want to point out, in case you didn't notice, the passenger side (2nd one shown) vinyl is torn for a length of the bottom edge. Doesn't make it around the edge. Some gluing obviously needed on both and probably that torn one could be glued so it isn't really noticeable. I can take a close-up if you want. I consider them cores or for what I had them for, to have old door panels in an old truck that fit the character.

prairewolf 09-19-2017 07:22 PM

Re: Vinyl Door Panels
 
I will say yes to the retainers in that I have never replaced door panels. ... I will trust your judgement on what to send. the panels look exact or very close match to what I have so they will be good. thanks, I am heading in the direction of a Patina preservation look with a good interior. . p.s. shipping will work out too in that those are the ones I want. ....don't wait 3 weeks or I will be broke again:)

special-K 09-20-2017 11:18 AM

Re: Vinyl Door Panels
 
5 Attachment(s)
EDIT: This deal never went through. Still available 11/6

Ok, If you truck had plain steel panels those painted retainers won't work with the added thickness from the vinyl and you'll need the chrome. Now you said nice interior and I'm not sure you mean nice condition or nice as in fancier. I took pictures of the not so good for you to be aware of. Honestly, I hadn't looked so close till taking the pics.

That bottom edge area looks not as bad. It is split along the edge, but looks like vinyl makes it to the edge where you could glue it to cover steel. Should look alright from unless you lay on the ground. There's the white paint to deal with. And what I didn't notice are the corners that make me unsure now. Here are pics...

Bottom edge:
Attachment 1691887
Corners:
Attachment 1691888
Attachment 1691889
Attachment 1691890
Attachment 1691891

Just want you to know what you are getting. I'm asking what I am due to condition. Were good enough for my purpose but can't speak for others. The glue has let go so the vinyl needs stretched back and glued.

If you want them and need the retainers let me know. I want another $15 for both retainers. I can get pictures of those, too.

prairewolf 09-23-2017 11:45 AM

Re: Vinyl Door Panels
 
I still want them, I have the same vinyl panels . I will PM you next week.

special-K 09-24-2017 10:13 AM

Re: Vinyl Door Panels
 
EDIT: This deal didn't go through. Still available 11/6

Ok, good. I'll get a shipping cost... before too long.

special-K 09-26-2017 12:24 PM

Re: Vinyl Door Panels
 
Quote:

Originally Posted by special-K (Post 8046635)
Ok, good. I'll get a shipping cost... before too long.

But then, why hurry, right? :lol: Just so you all know, Prairiewolf and me just couldn't come to an agreement on the pair. We arm wrestled, tug off war, all sorts of ways to settle this, even held our own makeshift congressional hearing type of thing (Oh the agony...the pain!). But nope, no good nada zip. Till finally, that is, just yesterday when he did agree to not buy these. It seemed like he was the only one on the planet making me sell them, so now I think I'm going to pull the vinyl (save that for something creative), strip the glue, and restore them as base metal panels.

The Black Driver side is still for sale................ $30

The Red Passenger side................................. $25 SOLD!

The Red pair are still for sale...........................$30 Now $20
................................................................................. Plus shipping

special-K 10-08-2017 09:41 PM

Re: Vinyl Door Panels
 
I never posted that sale never went through. Prairie wolf had to back out

projectking 10-09-2017 05:35 AM

Re: Vinyl Door Panels
 
I'll take the red drivers side!

special-K 10-09-2017 09:07 AM

Re: Vinyl Door Panels
 
Cool! I'll get it ready for the road.

SIXTY9 10-10-2017 04:03 AM

Re: Vinyl Door Panels
 
Tim,

Do you still have the upper door panel Strips? Chrome or painted it really don't matter.

Thanks.

SIXTY9 10-11-2017 12:55 PM

Re: Vinyl Door Panels
 
Ttt


All times are GMT -4. The time now is 07:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com