Torque specs and bolt sequence 250 Inline 6
 

Does anyone have the torque specs and the proper sequence of torquing the headbolts down? I cant find anything online. When I do there's 50 different answers. HELP!!!

Re: Torque specs and bolt sequence 250 Inline 6
 

Here's the sequence...it's the second one in the picture.
http://www.autozone.com/repairguides...00c152800849bb

Specs would be 90 foot pounds for all except the front two...those are at 80 so the front of the block doesn't crack.

Re: Torque specs and bolt sequence 250 Inline 6
 

Cool! Thanks for the info!

Re: Torque specs and bolt sequence 250 Inline 6
 

I usually go 95 ft-lbs on all but the front left (driver side) bolt, which is 85 ft-lbs. 90/80 is OK too. Follow the sequence shown in that image torquing in stages. All to 40 first, then 70, then to final. Re check torque after a few heat cycles.

Enjoy your 250 and welcome to the forums!

Re: Torque specs and bolt sequence 250 Inline 6
 

Thank you. Been on for years, just changed my name :metal: