The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 200-4R Pan Magnet (https://67-72chevytrucks.com/vboard/showthread.php?t=747045)

Hawker7

09-21-2017 08:33 PM

200-4R Pan Magnet

Does anyone know the size of the magnet that goes in the pan? Looking for the thickness and diameter. Thanks

AussieinNC

09-21-2017 08:40 PM

Re: 200-4R Pan Magnet

https://www.amazon.com/ACDelco-29535.../dp/B0016J3W90 $ 8.25 from Amazon...

AC Delco 29535617

6T7 C10

09-21-2017 08:44 PM

Re: 200-4R Pan Magnet

Approximately .25" thick and 1.75" across.

AussieinNC

09-21-2017 08:51 PM

Re: 200-4R Pan Magnet

It is donut shaped with a hole in the center...

Hole is about 7/8" in diameter...

Hawker7

09-21-2017 08:55 PM

Re: 200-4R Pan Magnet

1 Attachment(s)

Great. Thanks

Is this where they go? My pan was missing the magnet but I had just pulled apart a magnefine filter and it had a magnet that is 1/4" thick and just over 1.5" in diameter.

AussieinNC

09-21-2017 09:17 PM

Re: 200-4R Pan Magnet

It fits around a dimpled depression in the pan...that image looks correct...

:chevy::chevy::chevy::gmc2::gmc2::gmc2:

All times are GMT -4. The time now is 10:18 PM.