How do i change this vacumn actuator mount on heat/defrost control
 

The little white plastic mount that screws to the heat/defrost door is broken.It will not close the door all the way to direct air to defrost vents.How much trouble is it to change.

Re: How do i change this vacumn actuator mount on heat/defrost control
 

2 part epoxy???

Re: How do i change this vacumn actuator mount on heat/defrost control
 

Does anybody know where I can buy this plastic part that screws to door?

Re: How do i change this vacumn actuator mount on heat/defrost control
 

Re: How do i change this vacumn actuator mount on heat/defrost control
 

Thanks I ordered 2 today.

Re: How do i change this vacumn actuator mount on heat/defrost control
 

Once you can see and touch it, the only issue is that pin. On mine, it was a PITA to get out.

Sometimes you can find good one in pull-a-part places in newer trucks and Suburbans. Even though the look of the AC system changed, that part stayed the same for many years after 87. That pin is still a PITA in the newer ones as well.

Re: How do i change this vacumn actuator mount on heat/defrost control
 

I made a new one from sheet metal