The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   HELP on Firewall - Body paint or black? (https://67-72chevytrucks.com/vboard/showthread.php?t=748339)

HugoV 10-12-2017 07:17 PM

HELP on Firewall - Body paint or black?
 
Hello!

I am having a VERY difficult time deciding what color to paint the firewall...

A little info on my truck... 64' frame off restomod build. The truck will be painted a color between gunmetal gray and silver - metallic of course and the chassis and every part attached to it is powder coated black.

Should I paint the firewall the body color? If so, should I then paint the inner fenders the body color as well? If I do that, should I then paint the radiator support the body color too?

OR

Should I just paint all of it black?


Why would I go with one versus the other (other than just preference)??

HELP!! I just can't make up my mind!!

Thanks in advance!

The Rocknrod 10-12-2017 08:27 PM

Re: HELP on Firewall - Body paint or black?
 
Body paint!

TJ's Chevy 10-12-2017 08:39 PM

Re: HELP on Firewall - Body paint or black?
 
1 Attachment(s)
I did body paint on mine.

AngryPirate 10-12-2017 09:48 PM

Re: HELP on Firewall - Body paint or black?
 
I did the body color as well. I did all of the inner fenders and other supports satin or semi-gloss black.

Captainfab 10-13-2017 12:03 AM

Re: HELP on Firewall - Body paint or black?
 
I prefer the firewall to be body color. The inner fenders, radiator support, etc, satin black.

Joe Pass 10-13-2017 12:10 AM

Re: HELP on Firewall - Body paint or black?
 
1 Attachment(s)
Break tradition.....live on the edge..lol
Attachment 1698495

rvrfoot 10-13-2017 12:51 AM

Re: HELP on Firewall - Body paint or black?
 
Body paint.

urmyboyblue 10-13-2017 07:15 AM

Re: HELP on Firewall - Body paint or black?
 
Body paint is all fine unless you decide to repaint a different color down the road. Then you have to tear the engine bay apart to repaint the firewall. I have done this and it sucks. Not to mention that the body color looks great until you scratch it. Black covers this better and can be touched up easier.

I am working on a 66 C30 and plan on using the Saddle color that was used in the interior on the firewall- I think that this was stock depending on the factory that these trucks were built. I am using it on the interior as well.

urmyboyblue 10-13-2017 07:16 AM

Re: HELP on Firewall - Body paint or black?
 
Quote:

Originally Posted by Joe Pass (Post 8059782)
Break tradition.....live on the edge..lol
Attachment 1698495

I like that!

AngryPirate 10-13-2017 12:03 PM

Re: HELP on Firewall - Body paint or black?
 
Quote:

Originally Posted by Joe Pass (Post 8059782)
Break tradition.....live on the edge..lol
Attachment 1698495

That is pretty damn sharp looking.

ezrider01 10-13-2017 12:13 PM

Re: HELP on Firewall - Body paint or black?
 
This is a great discussion. I’m planning on body color for the firewall, inner hood and inner fenders....satin black for hinges and radiator & radiator support. Great point on the repainting comment tho...but will cross that bridge if I need to. Lol.

The Rocknrod 10-13-2017 01:20 PM

Re: HELP on Firewall - Body paint or black?
 
1 Attachment(s)
Quote:

Originally Posted by Joe Pass (Post 8059782)
Break tradition.....live on the edge..lol
Attachment 1698495

Bad to bone truck. I did the same thing. :)

Joe Pass 10-13-2017 01:36 PM

Re: HELP on Firewall - Body paint or black?
 
Thanks

Joe Pass 10-13-2017 01:36 PM

Re: HELP on Firewall - Body paint or black?
 
Quote:

Originally Posted by The Rocknrod (Post 8060028)
Bad to bone truck. I did the same thing. :)

Nice


All times are GMT -4. The time now is 03:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com