WTB 4x4 shortbed brake line clips
 

Looking to buy a set of brake line clips.
I have a 1971 K10 shortbed

Thanks for the help

Re: WTB 4x4 shortbed brake line clips
 

bump

Re: WTB 4x4 shortbed brake line clips
 

bump

Re: WTB 4x4 shortbed brake line clips
 

Bump. Still looking, does anyone have some?

Re: WTB 4x4 shortbed brake line clips
 

Bump

Re: WTB 4x4 shortbed brake line clips
 

Bump

Re: WTB 4x4 shortbed brake line clips
 

Maybe post a picture of the clips you are looking for might get you some responses?

I know a lot of us have "cans" full of stuff we've taken off of trucks and may use ... someday.

Re: WTB 4x4 shortbed brake line clips
 

I am looking for the brake line clips and distribution blocks/unions in the following locations. If anyone has them, I would really appreciate the help!


Red circle = brake line clip
Yellow circle = distribution block

#1: Front driver side - to master cylinder
https://i.imgur.com/ytSkjzPh.jpg

#2 Front driver side - distribution blocks
https://i.imgur.com/K2YflvVh.jpg

#3 Front driver side - to left front wheel
https://i.imgur.com/W7UViVlh.jpg

#4 Front crossmember
https://i.imgur.com/Too5zRmh.jpg

#5 Front passenger side
https://i.imgur.com/lkDcdBVh.jpg

#6 Front passenger side - brake line union
https://i.imgur.com/A5y8WPFh.jpg

#7 Passenger side - near transmission crossmember
https://i.imgur.com/SBklg43h.jpg

#8 Passenger side - near np205 frame mount
https://i.imgur.com/R4C4YuOh.jpg

#9 Passenger side - near bed mount tower
https://i.imgur.com/NPyOiHWh.jpg

#10 Passenger side - near rear shock mount
https://i.imgur.com/1VQNqfOh.jpg

#11 Passenger side - near rear bump stop
https://i.imgur.com/wcK8tPsh.jpg

#12 Rear axle - cover clip and distribution block
https://i.imgur.com/oGdE0J2h.jpg

Re: WTB 4x4 shortbed brake line clips
 

The unions are available at any parts house. Looks like you need (2) 1/4" unions & (1) 3/16" union. The distribution block @ the rear axle is part of the rear brake hose. That will take care of everything but the clips & someone here should have the proper clips. If you don't already have them, you will also need three "U" shaped retainers for the brake hoses. Generic ones are available at parts houses also. (the front hoses go through the frame & the "U" shaped retainer slides over the metal hose end on the inside of the frame. the rear hose goes through the frame tab in your next to last picture.

Can't remember - do the front hose retainers screw on like a large nut?