The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - ARP wheel studs for C10 (https://67-72chevytrucks.com/vboard/showthread.php?t=750515)

MalibuSSwagon

11-14-2017 11:17 PM

ARP wheel studs for C10

Anyone running ARP extended wheel studs on their C10? I've been looking around and can't seem to find the right part numbers for my truck. It's an 86, and I will be running a truck 12 bolt rear.

DBLSPRT68

11-15-2017 11:14 AM

Re: ARP wheel studs for C10

Following, because I've looked also and didn't find anything....

1957 Chief

11-15-2017 05:59 PM

Re: ARP wheel studs for C10

From my build thread...

"The original studs are a .535 knurl, these are a .547 knurl (dorman part number 610-298.) You will need a 17/32 drill bit to open the axles up. They have a small shoulder on them, so make sure your wheels will cooperate. I also had to drill the brake hats out to fit over them."

They aren't ARP, but a longer stud and a thicker shoulder.

Bubba

All times are GMT -4. The time now is 07:51 AM.