The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Window vent rivets (https://67-72chevytrucks.com/vboard/showthread.php?t=751605)

J Hibbard

11-30-2017 01:10 PM

Window vent rivets

What size are the rivets on the window vent of a 68 and Can I replace with screws and nuts
Posted via Mobile Device

notsolo

11-30-2017 01:24 PM

Re: Window vent rivets

Not positive on the size, I used machine screws same size as drawer pull handles..cut them off to about 3/8"....

J Hibbard

11-30-2017 02:21 PM

Quote:

Originally Posted by notsolo (Post 8093748)

Not positive on the size, I used machine screws same size as drawer pull handles..cut them off to about 3/8"....

Thanks I don’t want to drill and re rivet just so I might have to do it again
Posted via Mobile Device

notsolo

12-01-2017 08:08 PM

Re: Window vent rivets

I bought the kit, comes with cheap 3" punch, its pretty worthless...if you don't have the special high $$$ rivet tool it's near impossible to get them tight.

J Hibbard

12-02-2017 01:13 AM

Quote:

Originally Posted by notsolo (Post 8094690)

I bought the kit, comes with cheap 3" punch, its pretty worthless...if you don't have the special high $$$ rivet tool it's near impossible to get them tight.

Yeah I’ll just find some screws and drill the revits thanks
Posted via Mobile Device

All times are GMT -4. The time now is 02:47 AM.