The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - michigan metal works "dodger" a arms (https://67-72chevytrucks.com/vboard/showthread.php?t=751610)

Bentbolt

11-30-2017 02:31 PM

michigan metal works "dodger" a arms

has any one used them? im doing a budget build and looking a these up arms so I don't have to get bunch hiems and u joints to run my steering shaft. I already cupped my lower a arms. im run a 86 1/2 ton x member in my 65 c20.

http://michiganmetalworks.com/store/...&product_id=79

tinydb84

11-30-2017 08:06 PM

Re: michigan metal works "dodger" a arms

I only know one guy who is running them and it doesn't clear his steering shaft.

bbbc10

12-01-2017 03:39 AM

Re: michigan metal works "dodger" a arms

yea I would avoid mmw all together as they was no help with a set of arms I had from them an couldn't answer any quetions

andrewmp6

12-09-2017 05:20 AM

Re: michigan metal works "dodger" a arms

Quote:

Originally Posted by bbbc10 (Post 8094265)

yea I would avoid mmw all together as they was no help with a set of arms I had from them an couldn't answer any quetions

What arms was that ?Hes was big in the mini truck world and i never heard of a bad thing about him tell now.

All times are GMT -4. The time now is 01:29 AM.