Gates, roofs, doors, fenders. MN>TX
 

Will be heading from MN to northern Texas in Feb and Figured I would offer up some bigger parts for sale that I can haul with me. You will need to be close to my route or willing to meet close to it. (or local pickup in northern MN) No shipping otherwise.

Pb57 has first choice on gates and dieselwrencher has second choice as they have both asked about one.
Everything else is up for grabs. Prices are reasonable and would be OK with a few bucks for gas depending on how far out of my way I go.

$125 - Blue gate with protector. Surface rust, no holes I see. Very slight bow.
$350 - pair of 1972 door shells. Drivers side has a few pin holes, but has been blasted so you see what is there. Very straight on the outside.
$125 -fully blasted gate with a few pin holes and slight bow.
$400 -blue gate. pretty decent and straight. Has a few screw holes from a tailgate band.
$80 - green gate with dents on top otherwise clean.
$150 - roof with cargo light. Nice shape.
$250 - maroon gate. Slight bow, pretty decent.
$120 - red fender, pretty decent.
$80/each - blue 68 fender, gold 69-72 fender. Both will need a little work.

Re: Gates, roofs, doors, fenders. MN>TX
 

Also have a cab in another thread and a set of 15x8" 6 lug wheels. Will probably add more to this thread...

Re: Gates, roofs, doors, fenders. MN>TX
 

More...

Re: Gates, roofs, doors, fenders. MN>TX
 

Last...

Re: Gates, roofs, doors, fenders. MN>TX
 

Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago.

Thanks
John

Re: Gates, roofs, doors, fenders. MN>TX
 

Probably down I35 to des moines. Unsure after that, south and west from there.

Re: Gates, roofs, doors, fenders. MN>TX
 

We could probably work out a meeting place, I will PM you

Re: Gates, roofs, doors, fenders. MN>TX
 

Doors pending to john. More pics coming soon.

Re: Gates, roofs, doors, fenders. MN>TX
 

pics...

Re: Gates, roofs, doors, fenders. MN>TX
 

More

Re: Gates, roofs, doors, fenders. MN>TX
 

Few more pics for john

Re: Gates, roofs, doors, fenders. MN>TX
 

Bump for the other parts.

Re: Gates, roofs, doors, fenders. MN>TX
 

I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

Re: Gates, roofs, doors, fenders. MN>TX
 

More pics for you.

Re: Gates, roofs, doors, fenders. MN>TX
 

Is the grille for sale?

Re: Gates, roofs, doors, fenders. MN>TX
 

Back of gate looks pretty good with a few dings here and there. Overall a pretty decent used gate. Will try to add a couple more pics for you.


Sure, it is driver shape. $100. Will try to add pics soon

Re: Gates, roofs, doors, fenders. MN>TX
 

OK sure would like to see them

Re: Gates, roofs, doors, fenders. MN>TX
 

Ok thanks. I live just south of Dallas. Could meet up when you get down here if it's in better shape than the one I've got.

Re: Gates, roofs, doors, fenders. MN>TX
 

ugh....thought about "getting in line" for those 1972 doors but I looked at a map, looks to be at least a 3 day one-way trip for me.

Re: Gates, roofs, doors, fenders. MN>TX
 

On second thought, I reverse my decision....I'll get in line for those doors if the first fellow decides against those. *If you can allow me to come get those in March when I have the time off from work.

Re: Gates, roofs, doors, fenders. MN>TX
 

Back of gate and grill pics.

In the ten ring, I will have you in line for doors if anything falls through.

Re: Gates, roofs, doors, fenders. MN>TX
 

Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition.

Re: Gates, roofs, doors, fenders. MN>TX
 

Ok thanks. Shoot me a message when you make it down and I'll link up with you for the grille.

Re: Gates, roofs, doors, fenders. MN>TX
 

If you have a decent tailgate left by the time you get here I may take that too. Don't happen to have a chrome front or rear bumper do you?

Re: Gates, roofs, doors, fenders. MN>TX
 

Thanks man.