Accelerator cable bracket?
 

I searched through a lot of throttle cable bracket threads and have seen a lot of use of aftermarket style brackets. I was wondering if anyone has used a bracket off a GM car? I found this for a 69-72 Chevelle with a small block. GM #3992376

It looks like it’ll work for 72 truck with a small block. I have a manual trans so I don’t need the TV cable bracket. Anybody ever use one?

Attachment 1716326

Re: Accelerator cable bracket?
 

That could work as long as you have the grommet style cable attachment. It can be a trial and error deal. Try coming up with a pretty return spring setup for an Edelbrock!

Re: Accelerator cable bracket?
 

Update: Just got this in the mail from Original Parts group. It will work well on a edlebrock carb. I had to file a little notch to fit around the casting on the base of the carb but the notch also acts to keep this bracket in place. In case anyone is looking to use this.

Re: Accelerator cable bracket?
 

Cool, how about some pictures? I was thinking of using the same bracket

Re: Accelerator cable bracket?
 

Its not an Edelbrock carb but the same set up will work. I used a Spectre spring anchor as well as a GM 1972 throttle cable bracket, it came off the factory cast iron intake for the C/10 . https://scontent-dft4-2.xx.fbcdn.net...7a&oe=5AB082FA and here one with the Carter AFB carb, http://67-72chevytrucks.com/vboard/a...1&d=1178822656
If you run your springs toward the front of the motor they equalize the strain on the throttle shaft in the carb causing less wear and prolonging the life of the carb casting. ;)

Re: Accelerator cable bracket?
 

Man I never thought about that. That is a good point. Thanks Ironangel.

Re: Accelerator cable bracket?
 

Here’s some pictures

Attachment 1719387

Attachment 1719388

Attachment 1719389

Re: Accelerator cable bracket?
 

Sorry for em bein cock eyed. Cell phone upload. Just tilt yer head.