Anyone Have A Good Rebuildable Q'jet?
 

For my '72 402. Just need a good rebuildable one. I will bush the throttle shafts so a little slop is okay. Prefer one that is complete.
Thanx!

Reply
 

I have one off my 72 1 ton that I replaced with a rebuilt one. You can have it for $25.00 plus shipping. Just let me know.

Ernie
smonty46@hotmail.com

I have one for a 69 396, one for a 72 car 350 and another that is for a 71 350 truck.

10 bucks plus shipping

Hey Smonty..what # is on the carb? Txfirefighter, that carb is too new. I need the divorced choke style. Looks good though :)
Stingray, how much for the truck one? I can always swap jets and rods from my existing one. That is the only real difference anyway between big and small block ones.
Where did the other poster go??:confused:

Carb
 

Hello..I have a Q-Jet that was a AC Delco rebuild for a 455 Buick. I took it apart for the jets and a couple other small odds and ends. Never been ran since AC rebuild. $50 plus shipping from Mo. Need #'s, PM me or leave post. Thanks

that was me
 

I took it off because I don't know if it's for a 350 or a 400, I'm going to check the numbers tomorrow. I didn't want to try and sell before I knew exactly what is was.:)

This one works.. It was off a 1970 350.. been sitting on the shelf for a year. Worked fine.
$50 plus shipping from 97527

pbjohnson2@aol.com

I'll say 25 dollars plus shipping but let me find the carb # and check out the overall condition. I'll post later tonite.......if you haven't already found one by then. Q-jets are like belly buttons .....everbody has one:lol:

THANX ALL!!

Either of these seem like they would be good builders. Both have fairly decent throttle shafts. The small block carb is so complete that it even has the choke rod. The tranny and throttle ball studs are not there. The small block carb I'd let go for 25. The 69 396 truck carb I'd need 75 for. Shipping from up here will cost a bit too!

Big block 7029214

Small block #1

Small block 7040511 pic #2

Autozone here gets $50 just for a core charge

BFIC rebuilders
 

You might talk to these guys. I have bought 2 very nice rebuilds from them. They get $35 core for 402 carb.

www.carbsonly.com

ask for Carlos mention that you had talked with previous customer. They seem to want to please their customers, not all parts dealers are that way any more.