LS1 and Heating Question
 

Whats the easiest way to run heat in a 60-66 with an LS1? Can you use the factory heater core? Didnt see much on this.
Thanks

Re: LS1 and Heating Question
 

on my 81 I kept my stock heater....works just fine...

Re: LS1 and Heating Question
 

I used the factory heater core on my 1965, no issues at all.

Re: LS1 and Heating Question
 

thanks guys - was hoping this was the answer. Do you have pictures of the routing of your hoses? Would appreciate it.

Re: LS1 and Heating Question
 

I hope the pictures are there. The top picture shows the heater box with the hoses. The second picture, I replaced the slip on fittings with an AN/pipe thread adapter. I used 1/2 and 3/4 inch heater hoses. I cannot find any other pictures that shows the heater core hooked up. I used a female AN to push lock fitting for the connections to the motor.

Hope this helps.


[IMG]http://i1224.photobucket.com/albums/...psmoghyd74.jpg[/IMG]

[IMG]http://i1224.photobucket.com/albums/...ps5xg2ofjy.jpg[/IMG]

Re: LS1 and Heating Question
 

fantastic thanks