The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   front crossmember-pre runner bumber Build (https://67-72chevytrucks.com/vboard/showthread.php?t=758935)

nrb's70gmc 03-10-2018 03:23 PM

front crossmember-pre runner bumber Build
 
Hay everyone id like to share my most recent update to my truck
this idea started out of the blue and a piece of 12in x 3/8in flat plate.

it may not be what you like or built the way you woud do it but its 100% my truck and my idea and i think it turned out ok.

whole thing is bolt on using factory frame holes (+ some holes) with 1/2in and 5/8ths grade 8 bolts and the bumber can be removed from crossmember.

tubing is 1 1/2in .120 DOM

only tools used were a welder and and angle grider.
hope you enjoy.

SO IT STARTS- FRAME WIDTH X12in FLAT PLATE SCORDED AND HAND BENT, SEEMS WELDED UP GROUND DOWN AND SMOOTHED.
(MY IDEA WAS A CROSSMEMBER THAT WOULD WRAP AROUND FRONT OF TRUCK FRAME.


http://i118.photobucket.com/albums/o...4_134020_2.jpg

http://i118.photobucket.com/albums/o...4_133954_1.jpg

http://i118.photobucket.com/albums/o...724_134040.jpg

http://i118.photobucket.com/albums/o...7_135328_1.jpg

http://i118.photobucket.com/albums/o...7_142500_2.jpg

http://i118.photobucket.com/albums/o...727_142319.jpg

http://i118.photobucket.com/albums/o...805_143945.jpg

http://i118.photobucket.com/albums/o...807_155242.jpg

http://i118.photobucket.com/albums/o...807_155209.jpg

http://i118.photobucket.com/albums/o...807_155354.jpg

http://i118.photobucket.com/albums/o...808_105909.jpg

http://i118.photobucket.com/albums/o...808_142229.jpg

http://i118.photobucket.com/albums/o...808_142247.jpg

CROSSMEMBER ALL DONE


http://i118.photobucket.com/albums/o...808_105909.jpg


http://i118.photobucket.com/albums/o...806_153012.jpg


http://i118.photobucket.com/albums/o...910_140957.jpg

STARING TUBE BUMBER DESIGN-ANGLE OF 1970 GMC GRILL
http://i118.photobucket.com/albums/o...808_120242.jpg

MATCHING TUBE ANGLE WITH GRILL ANGLE
http://i118.photobucket.com/albums/o...808_120316.jpg

THE 2 (OUTER ANGLES) LINE UP WITH INSIDE OF HEADLIGHT BUCKETS
http://i118.photobucket.com/albums/o...808_131927.jpg

1/4in PLATE USED FOR FRAME TIE INS
http://i118.photobucket.com/albums/o...810_150551.jpg

HUGS THE FRAME
http://i118.photobucket.com/albums/o...810_150619.jpg

http://i118.photobucket.com/albums/o...0_153259_1.jpg

http://i118.photobucket.com/albums/o...917_145127.jpg

http://i118.photobucket.com/albums/o...917_145209.jpg

NOT ME :-)
http://i118.photobucket.com/albums/o...917_145106.jpg

DESIGNED IT TO LINE UP WITH BOTTOM OF GRILL
http://i118.photobucket.com/albums/o...917_145209.jpg

ALL DONE
http://i118.photobucket.com/albums/o...31394560_o.jpg

nrb's70gmc 03-28-2018 12:06 AM

Re: front crossmember-pre runner bumber Build
 
Current project. Tubular upper control arms. Built not baught

68 P.O.S. 10-26-2018 03:12 PM

Re: front crossmember-pre runner bumber Build
 
Looks great!

Mike C 10-26-2018 03:29 PM

Re: front crossmember-pre runner bumber Build
 
Nice fab. I will be watching for updates.

nrb's70gmc 10-26-2018 07:09 PM

Re: front crossmember-pre runner bumber Build
 
Update. I fabbbed some rectangular tubing upper arms. To be used with uniballs instead of ball joints.

Going to modify lower stock arms and will run a uniball set up there to.

Current project. Fabbing lifted spindles. Then front/rear disc brakes -hydroboost setup.

Already baught - 40x13.50x17 toyo mt. / real beadlocks - Atx slabs

68 P.O.S. 10-30-2018 10:32 AM

Re: front crossmember-pre runner bumber Build
 
Are you going to run the truck in the desert or is this more for looks?

special-K 10-31-2018 07:50 AM

Re: front crossmember-pre runner bumber Build
 
Nice work. I'm liking your plan. You'll be having a true custom concept/build. Nice!

Ol Blue K20 10-31-2018 08:43 AM

Re: front crossmember-pre runner bumber Build
 
Looks nice, I'm in to see more

nrb's70gmc 10-31-2018 03:15 PM

Re: front crossmember-pre runner bumber Build
 
Thanks everyone for the positivity. Some think its impossible or I dont have enough resources to build my idea.


All times are GMT -4. The time now is 04:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com