The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Help! Power steering leak (https://67-72chevytrucks.com/vboard/showthread.php?t=760512)

Trey1010 03-29-2018 08:51 AM

Help! Power steering leak
 
1 Attachment(s)
Hey everyone,

I am new here and have a power steering leak from the fitting shown in the picture. It leaks from the top of the fitting around the power steering line.. I can get the fitting any tighter than it already is. I removed the fitting and there isn’t a seal or anything, should there be?
Thanks in advance !

jeffahart 03-29-2018 10:53 AM

Re: Help! Power steering leak
 
It's a double flare, no seal. Usually you can back off the fitting then re-cinch. Since your removed drive it a bit. If it still leaks, back it off a quarter turn then cinch it down again. What did the the flared end on the line look like. If you can't get the leak stopped get a new line. :chevy:




j


All times are GMT -4. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com