1980 front brake hard lines were to buy
 

Hey Guys,

Bought some Willwood front D-52 calipers. Need to replace the hard lines from the proportional valve to the drivers side and passenger side frame connections previous owner rounded of the flare fittings

Where can these be purchased pre bent?

Thanks for any info

Re: 1980 front brake hard lines were to buy
 

there may be some but I've never seen prebent lines for older trucks....I've always bought straight sections and do my own bending..

Re: 1980 front brake hard lines were to buy
 

I'd go x2 on the bend your own.

Can I suggest cunifer or similar? Its:

1) dot approved
2) nickel copper alloy so it won't rust again
3) much softer than stainless so easier to bend and seat

Re: 1980 front brake hard lines were to buy
 

Inline Tube or Classic Tube has what you need.