5 speed overdrive in a 1969 c20
 

Ive got a 1969 c20 with the Muncie 4 speed on a 350. I've been looking to put an overdrive transmission in and was looking for some help from people that have done this in the past. I've heard that the t5 put of the S10 fits with no fabrication or drive shaft alterations however I'm curious I to the nv3500 five speeds that came out of the s10s with the v6 will also fit. I have access to one and I don't want to do to much extra work has anybody tried putting one of these in their pickup? And if so what was needed to get it to fit?
Thanks a lot I appreciate the help, Derek

Re: 5 speed overdrive in a 1969 c20
 

Here is a thread that covers a lot of that stuff.....

http://67-72chevytrucks.com/vboard/s...d.php?t=438224

LockDoc

Re: 5 speed overdrive in a 1969 c20
 

The T5 is a weak trans especially the non world class. The NV3500 is a stronger trans, however neither are C20 strength in my opinion. If you use it as a 3/4 ton truck you would be much happier with an NV4500

Re: 5 speed overdrive in a 1969 c20
 

Either a tko 600(if you have money and want more of a performance transmission)or a nv4500 if your going to use it as a truck. A nv4500 will be my choice unless I plan on racing.

Re: 5 speed overdrive in a 1969 c20
 

I think in your case, a ranger overdrive torque splitter is a viable solution.
Or at least its one that I would consider. http://www.advanceadapters.com/categ...-splitter/236/

Re: 5 speed overdrive in a 1969 c20
 

Can't believe I've never heard of this splitter box before. That's a nice unit!

Steve weim55 Colorado

Re: 5 speed overdrive in a 1969 c20
 

Looking to swap a NV4500 / Chevy trans in place of my TH350. Any help would be appreciated. What did you use for a clutch package? interested in using a Hydraulic clutch set up.... Help

Re: 5 speed overdrive in a 1969 c20
 

Sorry, I am new to this stuff ( Forum's) Looking for help sourcing parts for my 1970 C-10 conversion from th350 to a NV4500 .. I have a transmission and bellhousing, But asking for help with the clutch package and linkage. Looking to go Hydraulic and hopefully a robust set up and not plastic if possible.

Re: 5 speed overdrive in a 1969 c20
 

I had a 5 speed behind a v6 in a 84 S15. I always considered it just enough trans for the v6. In no way in the same heavy class as the old granny 4 speeds. IMO

Re: 5 speed overdrive in a 1969 c20
 

I didn't use a hydraulic clutch but here is how I did it using all of the stock mechanical clutch parts....

http://67-72chevytrucks.com/vboard/s...d.php?t=673588

I don't know what year NV4500 you have so that might make a difference. The one I used is listed in the thread.

LockDoc