The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Fuel sending unit question (https://67-72chevytrucks.com/vboard/showthread.php?t=761282)

66clow 04-07-2018 09:29 PM
Fuel sending unit question
 
I received the wrong sending unit. The fittings are different sizes. New one is too large. Should I just cut them off and run a rubber line or is that a bad idea? Waited a week for the dang thing and don't feel like returning and waiting for another one. Tried advanced auto to see if they had a fitting to adjust for the differences but no luck.

LockDoc 04-07-2018 11:48 PM
Re: Fuel sending unit question
 
Quote:
Originally Posted by 66clow (Post 8232714)
I received the wrong sending unit. The fittings are different sizes. New one is too large. Should I just cut them off and run a rubber line or is that a bad idea? Waited a week for the dang thing and don't feel like returning and waiting for another one. Tried advanced auto to see if they had a fitting to adjust for the differences but no luck.

I think that would work OK. I would still try to find an adapter fitting. You might try NAPA.

LockDoc


All times are GMT -4. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com