What's the best way to fix
 

my harness. It's out of a 2003 Savana so it's the Blue/Green PCM with DBC. The previous owner (MDOC) butt spliced a couple of wires from the PCM to the injectors. The coolant temp sensor plug is gone and they spliced in a connector for the camshaft position sensor. I don't see a lot of aftermarket harnesses for my donor and don't mind doing the repairs. I just don't know the best place to get the connectors and terminals. I thought about hitting the pull a parts for a scrap harness and robbing wires from it to repair mine. What say ye?

Re: What's the best way to fix
 

That's what I would do. Just go to the 0ick a part and get the ends you need, then solder and heat shrink them. Should be perfectly fine if you do a good job.