The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   '79 C10 - Leaf Spring Helpers? (https://67-72chevytrucks.com/vboard/showthread.php?t=762459)

RedBed 04-24-2018 01:00 AM

'79 C10 - Leaf Spring Helpers?
 
Just used my '79 to tow a 16' Trailer with Compact Tractor and Implements today.

Did fine, but rear was sagging pretty good. Not enough to keep me from doing the job, but made me curious if there are Leaf Spring Helpers for this truck?

It is a Big 10. I once had a buddy dump +/- a yard of dirt into the bed and it went WAY low with that load! :lol:

Dead Parrot 04-24-2018 08:47 AM

Re: '79 C10 - Leaf Spring Helpers?
 
How many leaves do your springs have? Possible a PO removed some leaves to soften the ride.

What was the tongue weight of that trailer/load combo?

Depending on the water content in that dirt, you were probably way over your nominal 1/2 ton payload limit.

kwmech 04-24-2018 10:44 AM

Re: '79 C10 - Leaf Spring Helpers?
 
If you are using the truck for that kind of hauling, you're going to need at least a 3/4 ton before you break something major. The 1/2 tonners were not meant for that kind of duty

RedBed 04-24-2018 11:09 AM

Re: '79 C10 - Leaf Spring Helpers?
 
The dirt was definitely pushing it, but it was a 1/2mi trip. The Trailer was loaded with more equipment than it probably ever will be again. And I won't be doing it frequently.

Looks like I have 8 leafs?

https://lh3.googleusercontent.com/cC...4=w650-h366-no

kwmech 04-24-2018 12:21 PM

Re: '79 C10 - Leaf Spring Helpers?
 
More than enough leafs for the 1/2 ton. My 3/4 ton has 9. My 1 ton dually has 14 between the 2 packs

RedBed 04-24-2018 02:03 PM

Re: '79 C10 - Leaf Spring Helpers?
 
Didn't the BIG 10 come with extra Leafs?

Anyway, It would be nice if there was an easy bolt-on spring helper.

moregrip 04-24-2018 02:46 PM

Re: '79 C10 - Leaf Spring Helpers?
 
Quote:

Originally Posted by RedBed (Post 8246473)
Didn't the BIG 10 come with extra Leafs?

Anyway, It would be nice if there was an easy bolt-on spring helper.

too bad your not closer, I'd give you a set for free!

RedBed 04-24-2018 02:49 PM

Re: '79 C10 - Leaf Spring Helpers?
 
What kind do you have? I am having trouble finding anything that will fit.

95 S_Trucker 04-24-2018 02:59 PM

Re: '79 C10 - Leaf Spring Helpers?
 
I would look into a weight distribution hitch. You'd keep your nice smooth ride when you aren't towing, and you won't sag as much in when you're towing.


BTW, the Big 10 did have some extra leaves in the springs. Just enough to raise the GVW to the next weight class to avoid extra emissions equipment.

tucsonjwt 04-24-2018 03:21 PM

Re: '79 C10 - Leaf Spring Helpers?
 
x2 on weight distributing hitch. Also, check out Helwig helper springs. Also, 3/4 ton pickup or larger is best for what you are towing. Check your vehicle's maximum towing weight against the load you are towing.

RedBed 04-24-2018 06:07 PM

Re: '79 C10 - Leaf Spring Helpers?
 
GVWR is 6050 on sticker. Load was maybe 5100 (trailer + load).

The weight distribution hitch sounds like a good idea.

moregrip 04-24-2018 07:29 PM

Re: '79 C10 - Leaf Spring Helpers?
 
Quote:

Originally Posted by RedBed (Post 8246499)
What kind do you have? I am having trouble finding anything that will fit.

they are like an add a leaf setup


All times are GMT -4. The time now is 06:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com