The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   59 Chevy 3 on the tree linkage help (https://67-72chevytrucks.com/vboard/showthread.php?t=765378)

lankster35 06-10-2018 04:59 PM

59 Chevy 3 on the tree linkage help
 
3 Attachment(s)
I have been searching online for pics or manual on how to fix my 3 speed linkage. The linkage came apart on the steering column and the shifter box (?) where it attaches just outside the firewall on the steering column. Can some please help me out and let me know how the linkage is connected to the gear box? I have attached 3 pictures

Thanks for any ones help. It only has 1st and reverse until I get it connected again so cant enjoy the ride :(

Bob

Foot Stomper 06-10-2018 06:50 PM

Re: 59 Chevy 3 on the tree linkage help
 
1 Attachment(s)
Do you have both levers?

lankster35 06-10-2018 06:58 PM

Re: 59 Chevy 3 on the tree linkage help
 
Yes. All the linkage is there and the top one is still attached. The bottom one just fell off and it needs to be attached - with something. I found a Remanned 3 speed transmission shifter box online and it looks like it comes with both arms/levers attached so I am thinking it is some kind of pressed bushing.

lankster35 06-10-2018 07:08 PM

Re: 59 Chevy 3 on the tree linkage help
 
1 Attachment(s)
This is the reman I found online and I beleive it is the correct one but if all I need is a bushing of some sort would rather buy it that spend $70 plus $60 core charge and shipping for this one. There are also some rubber grommets on the top linkage that this reman doesn't look like it would come with and mine look like they are half disintegrated.

Foot Stomper 06-10-2018 07:43 PM

Re: 59 Chevy 3 on the tree linkage help
 
Can't help anymore except to say that the shiftier block is very easy to remove from the column. Perhaps you could remove it to get a closer look and ability to put it back together.

The rubber "grommet" serves to keep the dirt off the grease that's on the shaft as it does slide forward and backward through the block when selecting Reverse/low and 2nd/3rd.

lankster35 06-10-2018 07:45 PM

Re: 59 Chevy 3 on the tree linkage help
 
Thanks. Hoping someone knows how the linkage remains connected to the shifter box.....Hard to find info online and in the mean time I will try removing it and taking a look. thanks for your help....


All times are GMT -4. The time now is 12:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com