The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Mercedes Buckets in a Squarebody? (https://67-72chevytrucks.com/vboard/showthread.php?t=766179)

rideair 06-23-2018 10:48 AM

Mercedes Buckets in a Squarebody?
 
4 Attachment(s)
Has anyone ever tried putting a set of w126 Mercedes bucket seats in a squarebody?

They appear to mount via flat rails, have power up/down in front and rear of seat, power moving front to back, power angle of back, and power headrest to boot!!

Found in leather (grey, tan, blue, red).

abig84 06-23-2018 01:19 PM

Re: Mercedes Buckets in a Squarebody?
 
Anything is possible I put 2009 Volvo seats In my 86, and the brackets didn't mount up at all. The worst was the wiring. The 8 position power seat and memory works I just never figured out how to get the heated seats to work as the buttons were on the door of the car and missing

http://i.imgur.com/TgRBCMLl.jpg

cadillac_al 06-23-2018 07:37 PM

Re: Mercedes Buckets in a Squarebody?
 
Those Mercedes seats look slim enough. It's hard to tell without seeing them in the truck. If you are average height or taller you won't like losing leg room with thick cushy seats.


All times are GMT -4. The time now is 08:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com