WTB Overload Spring
 

Looking for (1) C20 rear overload single leaf spring. Goes on a 69 Custom Camper. My single leaf has broke in two directly at the bolt. Would be willing to buy a set of (2) is price is reasonable. Thanks.

Re: WTB Overload Spring
 

I got a set in good shape springs with the brackets but no axle plates but sounds like you don't need them. I'll do 70 shipped for the pair.

Re: WTB Overload Spring
 

any spring shop can make you 1

Re: WTB Overload Spring
 

Here is a pic of my original spring. It's approximately 29" long. If the set you have bigrigpardo matches mine, I'll take the set.

Re: WTB Overload Spring
 

I'll pull them out at lunch and measure them.

Re: WTB Overload Spring
 

Yup these are what you need. PM me the shipping address so I can double check on shipping. These suckers are heavy. PayPal is bikes9t9@aol.com. please ad the 3% to cover the fees.

Re: WTB Overload Spring/ UPS Lost Em'
 

So unfortunately UPS lost the springs I ordered from bigrigpardo, so my search will continue. Would anyone else by chance have a set they would be willing to part with before I contact a spring shop?

Re: WTB Overload Spring
 

I have a set axle plates and all. Will do $80.00 for all plus shipping.

Edit- I just saw that you are looking for C20. These came off a 1967 C10. Not sure if the same. I will have to measure.

Re: WTB Overload Spring
 

Pics for Cameron-
These are off a 1/2 ton; but they do measure 29"
Maybe some of the experts out there know if there is a difference between 1/2 ton and 3/4 overload springs?
I would think the pound rating might be different?
Ron

Re: WTB Overload Spring
 

I have a set on a 72 c20, will have to measure tomorrow. Dwayne

Re: WTB Overload Spring
 

I would go this route and have them make a pair so you are starting with a matched set. This way, one will not be sagging lower than the other.

Just my .02 cents!

Bill

Re: WTB Overload Spring
 

I measured mine , they are 29.5 here is pictures of each side. 40.00 for the pair plus shipping if interested