The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - Reinstalling PS pump pulley (https://67-72chevytrucks.com/vboard/showthread.php?t=766647)

67pete300

07-01-2018 05:34 PM

Reinstalling PS pump pulley

1 Attachment(s)

I bought an installer kit to reinstall the PS pump pulley but it appears the internal threads in the pump shaft that the installer screws into have rusted away to nothing.

I tried just banging the pulley on for a short while but that didn't seem smart or successful.

Any other ideas before I buy a new pump?

ls1nova71

07-01-2018 06:23 PM

Re: Reinstalling PS pump pulley

Run a tap through the threads to clean them up. I do that all the time.

67pete300

07-01-2018 06:31 PM

Re: Reinstalling PS pump pulley

what size are the threads? The installer bottoms out without engaging any threads.

mongocanfly

07-01-2018 07:50 PM

Re: Reinstalling PS pump pulley

Driving or pressing that pulley on is a nono....it'll break the internals....always use a installation tool...
.https://www.corvetteforum.com/forums...ring-pump.html
Like nova says,,run a tap in there..

67pete300

07-01-2018 08:11 PM

Re: Reinstalling PS pump pulley

Duh. That was easy. 3/8x16.

Thanks guys.

All times are GMT -4. The time now is 02:47 AM.