The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - need wiring help (https://67-72chevytrucks.com/vboard/showthread.php?t=766668)

1G1YY

07-01-2018 10:56 PM

need wiring help

I am doing a 350 TPI swap into my 62 and have an Autometer elec speedo.
I also have a Dakota SGI-5-E interface unit.
I am getting very confused about how to wire up the stock GM T700 VSS to the Speedo and how to connect the Interface to provide a 2000ppm signal to the stock 165 ECM.
I have spent much time researching this but cannot find a schematic for this.
Any help would be appreciated.

1G1YY

07-21-2018 04:02 AM

Re: need wiring help

TTT
I would appreciate help with this..thanks.

Palf70Step

07-21-2018 07:31 AM

Re: need wiring help

I have not done this or dealt with any that had the VSS. I believe from what I have heard you need an adapter to match the dash up. Have you called Dakata dig support?

All times are GMT -4. The time now is 09:57 PM.