The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   59-60 impala dash swap ac question (https://67-72chevytrucks.com/vboard/showthread.php?t=767617)

J3rm0ff 07-16-2018 10:01 PM

59-60 impala dash swap ac question
 
1 Attachment(s)
I have seen a few 59-60 impala dash swaps on here but haven’t seen anything about under dash heater/ ac. I’m working on putting my dash in and decided to pause and figure out what to do for the ac before going further.

Or anyone know of a small heater/ ac I could get from a junkyard.

cliff67 07-17-2018 06:57 AM

Re: 59-60 impala dash swap ac question
 
I put a vintage air compac gen 2 unit in mine. Good luck with your build

J3rm0ff 07-18-2018 04:20 PM

Re: 59-60 impala dash swap ac question
 
Quote:

Originally Posted by cliff67 (Post 8302758)
I put a vintage air compac gen 2 unit in mine. Good luck with your build

I was looking at that one and the mini and I don’t think there will be enough room. At least how I have it positioned now. I may have to pull the dash further into the cab.

cliff67 07-19-2018 09:58 PM

Re: 59-60 impala dash swap ac question
 
I just made a smaller glove box

J3rm0ff 07-19-2018 10:17 PM

Re: 59-60 impala dash swap ac question
 
Quote:

Originally Posted by cliff67 (Post 8304778)
I just made a smaller glove box

That’s along the lines of what I was thinking. I’m going to pick up the vita he air mini tomorrow from summit racing. Do you happen to have some pictures of your dash and ac?

cliff67 07-20-2018 06:42 AM

Re: 59-60 impala dash swap ac question
 
Quote:

Originally Posted by J3rm0ff (Post 8304798)
That’s along the lines of what I was thinking. I’m going to pick up the vita he air mini tomorrow from summit racing. Do you happen to have some pictures of your dash and ac?

I have a couple of shots on the post your dash thread page 3 you can kinda tell how deep the dash is. I know I used the stock location mounting side bolts


All times are GMT -4. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com