The 1947 - Present Chevrolet & GMC Truck Message Board Network - Wood floor cross sill height measurement needed

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Wood floor cross sill height measurement needed (https://67-72chevytrucks.com/vboard/showthread.php?t=770130)

66clow

08-26-2018 08:22 AM

Wood floor cross sill height measurement needed

2 Attachment(s)

Could someone measure the height of the two Center cross Sills for a wood bed. I think I ordered the metal cross sills and I need to see if I need to cut them down or just order new ones. Too late to return them I painted them. Looks like they should be 2 inches vs 3 for a metal floor. I'm about an inch too high at the front and rear sills. Hand made wood sills were there before. 2 and 3 in the diagram.

ZEKE68

08-26-2018 10:18 PM

Re: Wood floor cross sill height measurement needed

Bump for you. I could measure mine but I have a step side.

68bowtie

08-26-2018 11:42 PM

Re: Wood floor cross sill height measurement needed

Should be 2-1/4” for all of the larger ones for a wood bed fleetside.

66clow

08-27-2018 12:48 AM

Re: Wood floor cross sill height measurement needed

Quote:

Originally Posted by 68bowtie (Post 8331102)

Should be 2-1/4” for all of the larger ones for a wood bed fleetside.

Yes think I ordered metal floor ones:banghead::banghead: guess I may need to cut these.

All times are GMT -4. The time now is 06:39 AM.