The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OH Bucket seat braces (https://67-72chevytrucks.com/vboard/showthread.php?t=770889)

atog 09-07-2018 11:17 AM

Bucket seat braces
 
1 Attachment(s)
I recently had my buddy’s local fab shop make me some bucket seat floor braces and had to get a quantity in order to keep cost down. These are thicker than originals as they are made out of almost 1/8 inch steel. They are not 100% identical but I feel they are stronger and will be better than the rusted ones we are used to finding $150 shipped in conus. I started a new post due to poor pictures before

atog 09-07-2018 11:19 AM

Re: Bucket seat braces
 
1 Attachment(s)
Two

atog 09-07-2018 11:21 AM

Re: Bucket seat braces
 
1 Attachment(s)
Three

atog 09-07-2018 11:22 AM

Re: Bucket seat braces
 
1 Attachment(s)
Four

hevy_chevy67 09-14-2018 10:05 AM

Re: Bucket seat braces
 
PM sent.

Stagerunner 09-15-2018 11:40 PM

Re: Bucket seat braces
 
What is the cost?

special-K 09-16-2018 07:15 AM

Re: Bucket seat braces
 
Quote:

Originally Posted by Stagerunner (Post 8345286)
What is the cost?

i'm seeing $150 shipped.

This is a great part, but I sold my bucket seats.

old51sedan 09-16-2018 10:20 AM

Re: Bucket seat braces
 
I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

DaHos 09-16-2018 10:34 AM

Re: Bucket seat braces
 
If you are heading up to MI today I will take one if you can bring it with you.....

atog 09-16-2018 01:04 PM

Re: Bucket seat braces
 
Quote:

Originally Posted by DaHos (Post 8345454)
If you are heading up to MI today I will take one if you can bring it with you.....

Will do. I have some in truck already along with a blue fender

DaHos 09-16-2018 01:07 PM

Re: Bucket seat braces
 
Quote:

Originally Posted by atog (Post 8345548)
will do. I have some in truck already along with a blue fender

ty !!

bluek5 09-16-2018 02:56 PM

Re: Bucket seat braces
 
3 Attachment(s)
Quote:

Originally Posted by old51sedan (Post 8345442)
I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

The brace goes on the underside of the cab.

Already Gone 09-16-2018 03:32 PM

Re: Bucket seat braces
 
Quote:

Originally Posted by old51sedan (Post 8345442)
I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

If your truck came with a bench seat from the factory then the holes for the buckets are in a different place. The brace only works for the inside front holes of the buckets. You need to remove the outboard front and rear braces and replace them with bucket seat braces. If you have a factory console when you get down to the bare floor you will see 4 dimples in the floor when the console bolts too.

old51sedan 09-16-2018 06:12 PM

Re: Bucket seat braces
 
Thank you so much for answering my question in regards to concerns on installing buckets. Truck is currently stripped down to nothing, so when I go to the paint shop I will be looking for the dimples for the center council. What do you mean by outboard front and rear braces? Are you talking about the tracks off the bench seat compared to the ones on the buckets?

Already Gone 09-16-2018 09:17 PM

Re: Bucket seat braces
 
Quote:

Originally Posted by old51sedan (Post 8345741)
Thank you so much for answering my question in regards to concerns on installing buckets. Truck is currently stripped down to nothing, so when I go to the paint shop I will be looking for the dimples for the center council. What do you mean by outboard front and rear braces? Are you talking about the tracks off the bench seat compared to the ones on the buckets?

By outboard I mean closest to the door. Here is apretty good thread on the bucket seat floor.

http://67-72chevytrucks.com/vboard/s...d.php?t=562904

old51sedan 09-17-2018 08:36 AM

Re: Bucket seat braces
 
I appreciate the information on the bucket seat installation. It's a lot clearer now, time to start measuring. Thanks again

atog 09-19-2018 06:35 PM

Re: Bucket seat braces
 
Special k bluek5 and alreadygone thanks for your replies and help. I’ve been out of commission for last couple days and appreciate your help. Been trying to do too much at one time and heat got the best of me. Been catching up on much needed rest. Daughter is getting married Saturday so that just adds more to the workload. Marriages have came a long way since I tied the knot . 200 plus people and catering. UBELIEVABLE

rustyrexiusrodz 09-20-2018 10:45 PM

Re: Bucket seat braces
 
This is a cool product

Robert Martin 09-22-2018 08:57 AM

Re: Bucket seat braces
 
Do these braces go on each side for the sport buckets? Seeing how both seat buckets have different mounting frames, one is stationary and one has an adjusting seat.

atog 09-22-2018 10:13 AM

Re: Bucket seat braces
 
These are like the ones under blazers and 69-72 pickups with bucket seats. This is the front brace that’s tac welded underneath. You will still need the rear brackets which roger Koop sells on the board

snow man 09-24-2018 11:45 AM

Re: Bucket seat braces
 
have any of these brackets left? need payment address info

atog 09-24-2018 05:39 PM

Re: Bucket seat braces
 
Quote:

Originally Posted by snow man (Post 8350667)
have any of these brackets left? need payment address info

Yes I still have some My PayPal is atog65@live.com

randy.powell 09-26-2018 09:40 AM

Re: Bucket seat braces
 
Hey Gunner - still have another set? If so, I'll take one.
B/R,
Randy

atog 09-26-2018 09:47 AM

Re: Bucket seat braces
 
I still have a few

snow man 09-26-2018 11:05 AM

Re: Bucket seat braces
 
pay pal sent


All times are GMT -4. The time now is 09:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com