Newbie From Arizona
 

Hello all.

After searching this forum and getting alot of valuable questions answered, I finally became a member.

I have a 68 GMC that's kind of a mutt. Somewhere along the way it was converted to 4x4 with a sbc350. I am swapping out the 10 bolt axles for a 14 bolt rear with disk brakes and a dana 44 up front. It's also getting a 2001 5.3 vortec swap with the 4l60e and np208 transfer case. I am trying to keep the exterior/interior as original as possible with just updating all the running gear. I have most of my parts on hand now it's just a matter of getting it all finished up and drivable.

Thank you all.

Re: Newbie From Arizona
 

Congratulations on joining. Good to have you. Nothing wrong with mutt, that is what drives use to build our trucks.
We may need to talk on that 10 bolt. I have been keeping my eye out for a used 10 bolt 6 lug
:metal::metal:

Re: Newbie From Arizona
 

greeting(s) to the board ...

Re: Newbie From Arizona
 

If you are localism and can pick up the stock axles they are all yours. I have no use for them. The rear end is the orginal and the front is a 4x4 10bolt

Re: Newbie From Arizona
 

Sounds like a date. I’ll hit you up in a PM