Iso
 

Looking for some Suburban sheet metal.

Cab floor under front seat area (rocker to rocker, can be split in to 2 pieces)

3rd door needed

Inside fuel neck cover

Also driver's side see below...

i think I have an extra fuel neck cover if your interested. I’ll look tonight and post a pic of it
Posted via Mobile Device

Re: Iso
 

Thank you for checking.

I have a very nice one but it’s still in the suburban. The suburban is a doner for a crew cab build but I’m not at the point of removing this section. When I remove it hopefully later this winter your more than welcome to buy it. Sorry I couldn’t help at this time
Posted via Mobile Device

Re: Iso
 

Following

Re: Iso
 

Jim,
I have a few questions

There is a seam where the front floor meets the 2nd row floor that is under the front seat. How far forward and rear of that seam do you need?

If it goes far enough forward, do you have high or low hump transmission tunnel? Anything forward of that seam should be the same as truck I think.

How great of a 3rd door do you need? I have a couple but they both do need work done.

I have a fuel neck cover but it needs mounting lip work done to it.

I am unclear what your picture is of?

Richard

Re: Iso
 

I hope this is a better pic. This is the pillar inside the rear of the burb, I need the driver's side. The other pic in orange is a section of of a burb quarter cut about window level.

As far as, the 3rd door...mine would need to be skinned and the inside bottom replaced. If yours are solid they would be better.

Thanks

Re: Iso
 

Richard,

I need to patch the area of floor where the seat bolts in...from just behind where the front floor pans cover to the rear of the front seat.

Re: Iso
 

I will take a look today to see if wither of my rear pillars are good. How high up do you need on the pillar from the bottom or do you want it all the way to the roof line? I will post pics as well

Re: Iso
 

Cut at level of bottom of window would be great.
Thanks.

Re: Iso
 

Well struck out on some of it but here are pics of what I do have.

I have a couple pass side pillars that are decent but all driver side ones are rotten below the rear sill



The floor sections I have are all rotten on one side or the other except for this one that I do not want to cut down any. You should be able to broaden your search to include pickups for this pc. as well. I have this floor listed for sale I will bring it to the top if you have interest

Attachment 1830678

The gas filler cover I have had rot in the mounting flange but i have started a replacement pc that I would include with it $40 plus shipping



Attachment 1830679

Attachment 1830680

Attachment 1830681

Attachment 1830682

Re: Iso
 

The 3rd door has some dents as well as some rust but not terrible. It is missing the inner lock pivot assembly. $100 plus shipping.


.

Re: Iso
 

A few more door pics


.

Re: Iso
 

How much for the floor?

Re: Iso
 

Post 41 in this thread

https://67-72chevytrucks.com/vboard/...=769566&page=2

.